Galant306m's turbo build/head swap
Its time to start this thing, as you remember this summer i picked up a 4g63 head and a 14b turbo. Now that school is coming to a end im get to dump some money into the G that has been waiting patently.
what i have to start with
http://i188.photobucket.com/albums/z...m/DSC00435.jpg
http://i188.photobucket.com/albums/z...m/DSC00436.jpg
have'nt decided if im going to run the 14b or if im going to go with something bigger.
the parts list
4g63 head kit
4g63 timing kit
new rods
new pistons
rings and bearings
intercooler piping kit
intercooler
2g equal length exhaust manifold and down pipe
2g turbo ecu (eprom if i can find one)
2g wire harness
BOV
maf translator
wide band o2 sensors
aem ems
boost gauge
boost controller
oil pressure gauge
oil lines
2g distributor
cams? haven't (decided if im going to cam it)
adjustable cam gears
injectors
fuel rail
fuel pump
and a 5 spd swap with lsd.
im still forgetting stuff but thats the basic parts list that im going to have by the end of January.
The goal is to have it done by June or July.
pics of the head getting pulled apart tomorrow when i get done. Once it is all pulled apart im going to take it to work and throw it in the hot bath with all the components. My friends dad owns a grinding shop that is going to blanchor grind the head for me for a case of beer, also know some one with a dyno thats going to charge 200 dollars for a session, which the session time is as long as i need to complete the tunes.
Stay tuned.