18x8.5 with +38 offset

the problem.... im getting a noise from what Im pretty sure is the left front wheel. I checked all four tires and they arent rubbing anywhere. The noise is pretty loud im thinking a bearing but it wasnt this loud when I had my other wheels on there. Could the new wheels be amplifying the bearing noise? There is hardly any vibration and to get just a little vibration you have to have it at about 60+. Im running 18's that are 8.5 width and 38 offset. 225/40/18 tires. Progress lowering springs with gr2s and I have a v6. any ideas?The noise sounds like a washing machine on its spin cycle.

offsets is too low. you want the offset around 45-47 I believe

damn. cuz they are nice and the price is deff right. http://images.craigslist.org/1221441...5ffa171ee2.jpg

damn those do look nice! if you went evo brembo they would be perfect.

I say they would fit just fine.

I was 18x8 +38, tires weren't even stretched.

Just roll ur fenders. Stretch the tires, and camber the sucker.

its ok. 215 should be ok but still need to roll your fenders.

I rock 19x8s with a +40 offset and 235/35-19s. So the height you are sitting at you will need to roll the fenders, and I'd suggest using 225/40-18s.

you can definately get them to work but the wheel may stick out a little..i have 19x8.5 w/ a 38 offset and without the fender flares or camber adjustment they would be out of the fender about 2-3 mm

Quote:

---

Originally Posted by fatal1

you can definately get them to work but the wheel may stick out a little..i have 19x8.5 w/ a 38 offset and without the fender flares or camber adjustment they would be out of the fender about 2-3 mm

---

+1, is gonna sit perfect on the rear, but is gonna stick out in the front though,

theyll work just roll your fenders

picked em up today for a steal! http://i54.photobucket.com/albums/g9...0922082044.jpg

nice. put them on11!

theyll be on tomorrow... got my mugen lip done today too! woo! the g got all my attention from like 2-10

Quote:

---

Originally Posted by 00galantguy

theyll be on tomorrow... got my mugen lip done today too! woo! the g got all my attention from like 2-10

---

Make sure you roll them fenders. What size tires on the wheels?

225/40/18s lol like u said but thats just what he had on there

nice looking wheels

thanks bro. I sampled one wheel. Shitty pic but here it is.
http://i54.photobucket.com/albums/g9...va212/rims.jpg

Looking good !!

Looks good, you definitely need fender flares though.

its not that bad!

yeah it looks mean but it sticks out about a millimeter or so... but other than that two-thumbs up

thanks man

same offset as mine but i have nineteens, i got 225's so you shouldnt have a problem

Looks good to me.

some pictures... and a problem.....

beforehttp://i54.photobucket.com/albums/g9...0923081601.jpg
after
http://i54.photobucket.com/albums/g9...0923081600.jpg
http://i54.photobucket.com/albums/g9...0923081643.jpg
http://i54.photobucket.com/albums/g9...0923081642.jpg
and the problem.... im getting a noise from what Im pretty sure is the left front wheel. I checked all four tires and they arent rubbing anywhere. The noise is pretty loud im thinking a bearing but it wasnt this loud when I had my other wheels on there. Could the new wheels be amplifying the bearing noise? There is hardly any vibration and to get just a little vibration you have to have it at about 60+. Im running 18's that are 8.5 width and 38 offset. 225/40/18 tires. Progress lowering springs with gr2s and I have a v6. any ideas?

MAKE SURE THE LUGNUTS ARE TORQUED DOWN PROPERLY!!!!!

mine made loud sounds before it flew off!

i checked once.. and checked again.. and once again after that. all wheels are on tight

might be just cuz the hweels are bigger and since they are sticking out you're just hearing them rotate? so its not a clicking sound then? lol

It almost sounds like a rubbing but i checked nothing is rubbing. it sounds like a wheel bearing to me just its super loud. I thought maybe cuz the rims were bigger and the tire smaller I might just be able to hear the noise more clearly. there was like a similar noise i knew was a wheel bearing but it was maybe 1/4 as loud

apparently from what im reading from searching its maybe just a crappy tire.... Id hate to replace the tires and find out its something else..

put the front to the rear and rear to the front. follow the sound. lol

make sure that the wheels are supposed to rotate in the correct direction.

the right front and rear left need to be switched in order to be rotating the way the arrow points... I just went with the labels the guy had saying lr lf rr rf but he obviously didnt have em right. another thing is the tire pressure was 25 front and 30 rear so im gonna put it at 33 all around and keep you guys posted! I also jacked the car up and spun the wheel to see if there was any noise or vibration but nothing too noticeable. So im going to pressure the tires correctly and switch the two that need to be switched and hopefully have a fix

Good luck, for future reference make sure you read up a lil bit. Putting on the tires in the wrong direction is dangerous, especially with regards to weather conditions. Hope it's an easy fix....

well i bought the rims with tires on the and the guy told me they are labeled to where they go so i assumed he had it right but yea im going to fix that right away

it was actually the rear wheels that were spinning the wrong way but yea they guy I got em from called me back and said that the tires were noisy on his car too because he had a front suspension issue causing them to wear funny. Im sure the tire pressure didnt help. So the tires are gonna be replaced in a couple weeks. im just glad to know its nothing to do with my car. But I did at least put the tires in the rear the right way

Quote:

---

Originally Posted by 00galantguy

some pictures... and a problem.....

beforehttp://i54.photobucket.com/albums/g9...0923081601.jpg
after
http://i54.photobucket.com/albums/g9...0923081600.jpg
http://i54.photobucket.com/albums/g9...0923081643.jpg
http://i54.photobucket.com/albums/g9...0923081642.jpg
and the problem.... im getting a noise from what Im pretty sure is the left front wheel. I checked all four tires and they arent rubbing anywhere. The noise is pretty loud im thinking a bearing but it wasnt this loud when I had my other wheels on there. Could the new wheels be amplifying the bearing noise? There is hardly any vibration and to get just a little vibration you have to have it at about 60+. Im running 18's that are 8.5 width and 38 offset. 225/40/18 tires. Progress lowering springs with gr2s and I have a v6. any ideas?

---

Trav,

Look at the left front tire, I'm willing to bet it has minor cupping or feathering. (Read: Uneven tire wear). And thats your issue, especially if there was no problems with your other tires and wheels on.

And when you need tires, ask me, its my business, I'll provide a good deal.

thanks man. what price could you get me for 2 falken 912s

Quote:

---

Originally Posted by 00galantguy

thanks man. what price could you get me for 2 falken 912s

---

I'll check the details tomorrow.

thanks man I really appreciate it !