Where did you guys get the shocks to hold up the trunk? i've been looking for a while for some. I had to remove my torsion bars to make my trunk sit flush and im getting tired of holding up my trunk everytime. What are some good brands?
Printable View
Where did you guys get the shocks to hold up the trunk? i've been looking for a while for some. I had to remove my torsion bars to make my trunk sit flush and im getting tired of holding up my trunk everytime. What are some good brands?
i know one company which is called "Redline"
http://www.redlinetuning.com/
I got the redline tuning ones. VegasMatt and Cali got the same. I got them from we sell car parts the vendor on here. I got them for an 02-07 lancer trunk. Make sure you specifiy that you need them for the CF trunk.
They can't be installed at the measurements that are enclosed with the struts though, as our trunks are larger. I don't believe I have the measurements anymore that I had mine done by. I was in contact with vegasmatt and cali when mine was done. I would pm either of them and see if they still have the pics and measurements that were taken for me, as I am not around my 8G as much as they are. If no luck with them I can get pics and measurements for you when I am near my 8G
so im reading that there is a quicklift and a quicklift elite. Does it really help to buy the elite? Its kind of expensive...
Can anyone of you post a picture on how and where they are installed?
Thanks
the difference is the warranty is longer with the elite, and the elite are stainless steel, and the regulars are black. I have the regulars. As far as the trunk being CF, they can make either one of them for the CFQuote:
Originally Posted by 2kgalant
I have some pics of mine. I will post them.Quote:
Originally Posted by SLS2000
they aren't get pics, but show they are installed.
http://i73.photobucket.com/albums/i2...7/DSC00375.jpg
http://i73.photobucket.com/albums/i2...02294Large.jpg
http://i232.photobucket.com/albums/e...6/HPIM0277.jpg
QNZ also has a set in his car too, but doesn't have a CF trunk, he might have some pics of them as well
If someone can get measurements for the Lancer kit for the trunk, that would be great! I plan on doing it in the near future with my stock trunk.
I dont have my camera on me. But I am going to my dad's house in the AM after work. I will try and get some measurements for you guys
will these lift a regular trunk?
I think so because I have seen them on stock hoods at club3G.
they r made for stock hoods and cf as well as stock trunks and cf ones u just have to specify whether u need for cf or stock this way u get the one with the right amount of pressure
okay.
I tried to take some pics the other day. I had a little trouble taking the pic and holding the tape measurer, but this should help a bit.
I only took of the driver's side. The passenger side should be the same
http://i73.photobucket.com/albums/i2...f/IMG00007.jpg
above picture is where the bottom mount is riveted down. The distance is from the rubber under the back window in the corner
http://i73.photobucket.com/albums/i2...f/IMG00005.jpg
the above pic is the same, but with tape measurer on inner side
http://i73.photobucket.com/albums/i2...f/IMG00008.jpg
this pic is from the back corner of the trunk
Thanks Jay! Looks like 2.25" to the center of the bracket for the bottom and about 15" to the center of the bracket for the top one. That will help a lot. Gives me somewhere to start.
For the Lancer trunk kit, did it come with rivets or screws for the brackets?
its a whole kit brackets and rivets or screws depending on the car its for, all u need is a rivet gunQuote:
Originally Posted by Danger DANJ
Yeah, I know, I have the hood shocks and had them installed with my CF hood which came with rivets for both mounts. But, in some of the kits on Redline's site, I've seen screws. I was just curious which ones the Lancer kit came with. The reason I ask is because I'm sure they use one or the other for a reason and I might try using my hood struts from when I had the CF hood and use them for the trunk. So, I want to make sure I use rivets where rivets were used and screws where screws were used.Quote:
Originally Posted by spdracr
EDIT: Never mind. I just dowloaded the installation PDF for the Lancer trunk kit and they use all rivets. The top brackets are different than any of the ones I have from my hood kit, so that won't work. : (
yeah David. Rivets for the hood and the trunk
check out McMaster-Carr they have a variety of brackets for gas shocks.Quote:
Originally Posted by Danger DANJ
i bought the eclipse cf hood struts thinking it would fit the galant but it was a totally different size shock and the brackets came with rivets and screw both so different cars do have different applications
Thanks but I just checked tonight and there is no way I can use my hood struts for the trunk anyway because they are way too short. Looks like I'll have to just buy the Lancer trunk kit. I'll try my hood struts with my stock hood and hope they work seeing as they are meant for a CF hood.Quote:
Originally Posted by pinoyesv6
Just wanted to report that I reinstalled my hood struts for the CF hood with my stock hood and they work great.Quote:
Originally Posted by Danger DANJ
I have them both on my CF hood and trunk.