Printable View
Hello. I want to tell how did the plastic parts of the interior. In the club 9G i was told, here, too, want to tell. I bought 9G in november 2010. I don 't like the grey plastic lining. As cheap chinese boombox. http://s012.radikal.ru/i319/1012/d4/1fcedc0ea9c3.jpg I decided to fix it.
I have a small workshop on the tuning and customizing cup..So, the details removed from the vehicle.http://s013.radikal.ru/i324/1012/f2/4af097fdaf73.jpg
http://s42.radikal.ru/i095/1012/8a/60c18b2918d1.jpg http://s009.radikal.ru/i307/1012/91/8c6240510467.jpgI have a few coatings. I chose the tree.
Initially it is necessary to apply the color of the base.http://s015.radikal.ru/i332/1012/a8/72db65235088.jpghttp://i010.radikal.ru/1012/37/30b810fee06c.jpg
After the dried begin printing. http://s50.radikal.ru/i127/1012/ad/670162c6f3c0.jpgIt is necessary to arrange coating on the surface of the water. Remove air bubbles under the surface.
http://s011.radikal.ru/i318/1012/cc/f1c58e44a6bd.jpg Apply activator for the beginning of a chemical reaction.
The chemical reaction dissolves coating. On the surface of the water remains only a figure of paint.http://s44.radikal.ru/i104/1012/90/c4ed33ffaa6e.jpg
Panel looked so http://i055.radikal.ru/1012/ab/9c031c8b5f98.jpg after the imerse looks like this. http://s48.radikal.ru/i122/1012/b1/ff0ee3180c92.jpg. Panel looked sohttp://s44.radikal.ru/i106/1012/ea/42e0be7b5c90.jpg after the imerse looks like this. http://s47.radikal.ru/i118/1012/9d/8bc534d17c4b.jpg
coating automotive lacquer and drying.http://i047.radikal.ru/1012/e7/7f9059d3484e.jpg http://s016.radikal.ru/i337/1012/80/27afaa41db11.jpg http://s009.radikal.ru/i307/1012/0e/598e4bb258cd.jpg
Install parts on the car. Sunny, clear day doing a photo shoot. http://s016.radikal.ru/i337/1012/8f/758227ea4515.jpg http://s004.radikal.ru/i206/1012/63/3de615bac87c.jpg http://s41.radikal.ru/i092/1012/1c/3a2d03e285af.jpg http://s52.radikal.ru/i137/1012/1a/bdeb22ac13f6.jpg http://s52.radikal.ru/i138/1012/d0/f1440e17b098.jpg http://s002.radikal.ru/i199/1012/4d/753ce057bf61.jpg
In the cabin was comfortable. Work in the cabins of other brands of cars. http://i004.radikal.ru/1012/2e/9236508627ed.jpghttp://i037.radikal.ru/1012/f2/f94a30ea6730.jpghttp://s011.radikal.ru/i316/1012/c6/9f704868a18b.jpghttp://s49.radikal.ru/i125/1012/55/32d8a885bc10.jpghttp://i014.radikal.ru/1012/e6/f55438609555.jpghttp://i058.radikal.ru/1012/5e/f6b368eb4ea1.jpg If the base is to make from the luminescent paint, then in the darkness panel lights.http://s008.radikal.ru/i304/1012/e4/07951314c84e.jpg in the daylight looks like stone.http://i022.radikal.ru/1012/da/bda29c76c830.jpg
again great job! we also have a vendor here that does this... NITRYUS.
Makes me want to change my interior panels lol
Man, your work is top notch.
great job...looks good...I want mine just like that
looks really good, how much would that cost to get done?
In Russia it costs $280-300. in the US i do not know.
so that would be 280-300 Rubles?Quote:
Originally Posted by stayer
$$$$$$$$$$$$$$$ dollars
280 rubbles = $9.95 dollars
he probably did the conversion already to US dollars :PQuote:
Originally Posted by Joshua42007
great job! it definitely looks a lot better than the "wood grain" that the US models came with
It costs 280-300 dollars (about 10000 rubles). Why do i write in russian rubles on the american site? I write dollars...
Or you can always get vinyl from places like Rvinyl.com . They have a lot of different selections from different styles of carbon fiber to diff colors of carbon fiber, colors, wood grains, etc. It's usually cheaper and easier to change. Plus when painting, its easy to chip/scratch/nick the paint. With vinyl you can just pull the vinyle off to change colors or styles or to repair, at fractions of the cost.
Just another option for those of you looking to change these... I plan to go with some of Rviny's stuff.
Let us know how that turns out... I wasn't impressed by the look of some of their applications :/Quote:
Originally Posted by tr1kst4nce
Great work stayer :)
What I did first was order a couple swatches, or samples first. Cuz you know the pictures will usually look great when they post them of course.. so... a few of the samples are, yeah, cheesy and typical fake looking carbon fiber... but the laminate is actually pretty realistic looking and realistic texture. So if I put it on the right parts, nobody would really know it's just vinyl except maybe you guys cuz I just told you what I'm going to do and you know what parts came what way stock.Quote:
Originally Posted by chadowski
Very nice work
Very nice, looks like OEM make
damn thats nice
can you post some pictures of how it looks after you did it?Quote:
Originally Posted by tr1kst4nce
Hi, can you tell me step by step on how to remove all those pieces. Thanks
Sent a PM.Quote:
Originally Posted by ruddi