Printable View
Hi TGC! Long ago, I hadn't been back here. I thought TGC died, on my computer the site does not open. All this time I was on Galant tuners. I want to tell You how I did fangs on his 9G. The last time my car looked like. http://s43.radikal.ru/i100/1104/f3/b879260d6b92.jpg Already passed the one year since I bought this car. I wanted to make changes in design. I bought the fangs from a Lancer X from ABC plastic. Here they are. .http://s15.radikal.ru/i188/1110/d0/f9ef67d466d6.jpg
Inside fang is regiment, of which he is attached to the bumper.http://s008.radikal.ru/i304/1110/c2/5c42cec4bdd0.jpg Take off the bumper. In the bumper have small tides, here I will install fangs.http://s007.radikal.ru/i301/1110/00/cba3f19637ed.jpg[/
Front overhang Lancer for about 3 inches longer than the 9G. Therefore, the teeth do not fit in length. Either on the top or on the bottom. http://s59.radikal.ru/i164/1110/f5/baaa6e5b84d5.jpg http://i048.radikal.ru/1110/2e/53a940e4db23.jpg[/
Of course, no one radius does not coincide with the bumper. http://s43.radikal.ru/i101/1110/3a/c61a5c8d046f.jpg http://i081.radikal.ru/1110/6e/c77e07ac6b72.jpg http://s016.radikal.ru/i334/1110/2a/5c5d1fb966c2.jpg I expected it, so it doesn't frighten me.
The first step, I cut off about 5 inches from the back of the teeth and assign to the bumper.http://i042.radikal.ru/1110/27/5a09c1292cf6.jpg So do markup. markup need that would fangs were identical.http://s58.radikal.ru/i159/1110/36/a3360c4f813b.jpg
Now you need to make the front of the fang.http://s42.radikal.ru/i098/1110/d0/b65e053f80b0.jpg
Fang is the stiffness and does not bend. For this it is necessary to cut off the bottom shelf. http://s017.radikal.ru/i435/1110/20/485be7de52ed.jpg Now it easily accepts any form. It can be mounted in the bumper. http://s009.radikal.ru/i307/1110/7d/5952fdb1abc7.jpg http://s53.radikal.ru/i141/1110/37/94618c31e90f.jpg
Fang is fixed. Now it is necessary to solidify a new form. http://s50.radikal.ru/i127/1110/c1/37e317c16f3e.jpg http://s61.radikal.ru/i173/1110/df/14990dfd590b.jpg
Now it is necessary to take a soldering iron 25w. And weld seams. http://s017.radikal.ru/i414/1110/04/afe2b35e2f22.jpg http://s001.radikal.ru/i194/1110/98/438abf668c03.jpg The bottom shelf, which had cut off, so be welded. http://i064.radikal.ru/1110/39/b874e8d5f545.jpg
Now fang acquired a new form.http://s57.radikal.ru/i155/1110/48/a6be0dfe6135.jpg
It would now take the heating dryer. Heating temperature of 480-500Chttp://s017.radikal.ru/i436/1110/84/4cb105032d1a.jpg The first step cook for internal stitches.http://s017.radikal.ru/i422/1110/55/2705d5481cda.jpg
The next step. Should be on the outer seams to make a V-shaped trench. http://i007.radikal.ru/1110/d1/af251910bf3d.jpg http://s017.radikal.ru/i443/1110/e4/24ec4cf2d197.jpg
Then you have to cook for external seams. http://s017.radikal.ru/i413/1110/32/12c1cda2681c.jpg
Set on the car. That was the way he looks now. Waiting for your comments. http://s003.radikal.ru/i202/1110/70/7450edcd8a1f.jpg http://s017.radikal.ru/i435/1110/d9/22bdb0bbb8f8.jpg http://s53.radikal.ru/i142/1110/e8/8302b31061fb.jpg http://s017.radikal.ru/i443/1110/e4/b9a50f7d8e36.jpg http://s017.radikal.ru/i423/1110/e8/1ec02120c2a2.jpg http://s017.radikal.ru/i406/1110/2d/5ea1fd72ebf1.jpg http://s42.radikal.ru/i096/1110/6b/1dbf00fda377.jpg http://s017.radikal.ru/i417/1110/d1/086d21b3202c.jpg
Not bad looks pretty good. nowloweritnow
It looks good,i would have extended them a little more in the middle though.
i think it looks great where it is on the line of the headlights and fogs starting! wanna make another set? =P
nice job
they seem a little short for some reason, but either way you did a good job on them
On the Russian forum 9G also say that this is lacking a bit. But there are laws of symmetry. The fangs of the symmetrical inserts under the fog lights. Even from the bottom of the bumper there are tides for fangs. I tried, now I want to make a rear spoiler and the rear bumper. This will be a separate topic.
not a big fan. but they look like they came on the car. nice job
Looks good, nice work!
Looks really good
i like it!
Thank you guys! It is pleasant to hear.
Looks unfinished... Good job on the fab work though.
Stayer, great job my friend! I am thinking of doing the same for my 9G 2007.. my car bumper is a little different but it should come out nice either :)
Makes a big difference to the look of the car - nice work
Hi, Michael! Call me, I will give you the necessary consultation.Quote:
Originally Posted by midiser
Nice job . Looks good
Nice job, it needs something else. I just don't know what.
Nice job:icon_cool::icon_cool:
that's awesome!
Great work!
It looks very nice!
Good stuff stayer, seen this post on club4g and had to give you recognition again.
Guys, Stayer lives in Russia, He is extremely knowledgable and very skilled. He does reflashed for us 6g75 and 4g69 guys. I'm sure if you paid him, andpaid shipping he would make another set for you.