I know the '00 ecu is locked and we can't tune them but can we at least delete the Immobilizer or no??
Printable View
I know the '00 ecu is locked and we can't tune them but can we at least delete the Immobilizer or no??
They can be tuned provided that the rom is defined properly speak wit Isaurio he can help you out.
Curious to know why?
Too cheap to pay for a chipped key lol
Lmao I was thinking that or remote start.
Lol yeah remote start could be in the future too but u said they could be tuned. Iirc the '00 ecu is locked and nothing could be done to them at all. Unless u guys have recently figured something out.
There's a program that unlocks the ecu it's not an issue anymore. Just give Isaurio a shout he can delete it for ya.
Will contact him. Thanks for the info.
No prob
I have the 1.3 cable. I don't wanna spend the money for the 2.0 cable. Boooo
I dont see a problem on getting to the 00 computer. Tactrix and ecuflash should help. What is the error code on ecuflash? Sometimes the flash connector dont have contact with the plug. Giving error code when you pull out the rom.
spdracr. PM replied.
Question. What model is it for. Eclipse or Galant PCM. 2000 dont have immb for the galant *I THINK*. Is the same processor chip as the 99.
EDIT---The 1.3U cable have problems pulling the rom with new version of ECUFLASH. try downloading a old version of the ecuflash.
This is almost 4 years ago when I was trying to understand ecuflash.
http://i233.photobucket.com/albums/e...wnROMimage.jpg
The 2000 has an Immobilizer cuz both of my Gs have chipped keys.
LOL. bro you are good. You dont have a XML for your rom. Is not a issue with the cable or locked PCM. it just ecuflash can't located the right memory address to put it together so we could understand. You need a xml made for your rom so ecuflash could open the maps.
You are all good bro. save the rom. Name it and send it to me.
Isaurio at hotmail dot com.
click on continue using this rom. go to file and save as. Name the rom and send it to me.
We find out with the rom if you have one. Also is this the original computer that the car came with?
You need to change the hex code. You need a xml with the imm location. Some periphery Define Sometimes it works like that sometimes it dont.
READ this. MATT "SPD_FRK" tells you the easy way of doing it. Like i said sometimes it works.
http://www.blackheartmotors.net/tech/Tuning.pdf
also when you change something keep your STOCK non modified rom in a safe place. Just in case you fuck something up. You could reflash the stock one.
Link dont work. BHM is doing maintenance on their website.
Here is a pic of the info. hope this info helps you. good luck.
http://i726.photobucket.com/albums/w...eteinstruc.jpg
NOTE: IF ANY ADMIN OR MODERATOR IS READING THIS. Please open a section just for Tuning. subfolder with ECUFLASH, EVOScan and other PCM-ECU and tuning related questions. Thanks
link fixed.
ok i just went and found the mother of all ecu flashes, i went and dl 1.28/1.29a and got nothing
on 1.29a i get
[00:23:46.437] sending init sequence 1 (0001)
[00:23:49.718] sending init sequence 1 (0003)
[00:23:52.984] sending init sequence 1 (FFFF)
[00:23:55.718] no response to any known code
link to where i found all the downloads for old version of ecuflash
http://evoecu.logic.net/mirror/ecuflash/releases/
My tactrix cable driver isn't working lol gotta find my ecuflash CD and install the driver.
you can just
download it online you dont need to find the cd
[QUOTE=Isaurio;743613]http://www.blackheartmotors.net/tech/Tuning.pdfQUOTE]
This is going to be really usefull for me soon. Thanks for the link and anyone looking to boost there ride should save this.
I finally have time to mess with this and I get this same message when I choose 2001-2005 Mitsubishi 3rd gen but my car is a 2000 and when I chose the 1996-2001 Mitsubishi 2nd Gen nothing happens.
Do I need a template for my car?? I'm determined to do this and any help is appreciated it.
Anyone??
You need to try with 2.0.
Make sure the flash adapter has good connection.
Yes. Cable 2.0.
Like i said. Maybe you need a old version ecuflash. The new one are having problems with the cable 1.3u.
Double check connection. Try using the second template. 2g since your rom is a h8 chip.
I'm using 1.44 ecuflash
Is this what I need??
http://www.tactrix.com/index.php?opt...d=17&Itemid=53
ok so i added the periphery configuration to the base xml file and i opened ecuflash and loaded my rom but still cant edit out the immobilizer
here is what i get
http://i233.photobucket.com/albums/e...mmobilizer.jpg
i spent hours searching this and got this far but now im stuck
Bro. Careful of what you put on the xml and value you change on ECUFLASH
That is the wrong memory location for your rom
Remember 99-00 ROM are H8 CPU- "YOUR ROM"
01-03 are SH CPU
H8 ROM periphery bits memory location starts at 0x272, 0x282 and so on
SH ROM periphery bits memory location starts at 0xFAA, 0xFBA and so on
I will send you new xml with the periphery for H8 ROM
So what was I doing wrong exactly?? U lost me half way there lol and again your help is truly appreciated
U used the SH memory location on a H8 ROM. Is a no go.
It looks like you were trying to use a hex code with a binary programmed computer? Lol idk. So i had an issue with my immobilizer, never got it fix, but i was using an evo 8 ecu...
I looked around. And is more hard than changing one bit at one location.
Found 8 location where bits needs to be disable = 0
From 0x10272 to 0x10280
Figured Mitsubishi won't make it easy for us to do this.
When ever you ready we will give it another world.