Attn: I can get TURBO Parts for Excellent Prices......

If you guys need turbo parts, such as parts off stock DSM's
such as
O2 housing
14b, t25 (please no) turbo
dsm downpipe
exhuast manifold
Side mount intercooler
450CC injectors
4g63t shortblock
4g63t Head, and Valvetrain components with cams, etc

pretty much anything you need from a stock DSM, i can get them...and for cheap, and the parts will be in excellent quality...if u need the turbo ported, i could possibly do taht too.. Id clean them up, no 2 year guarentee, but if u need things such as a head, turbo, exhuast manifold....its really easy to tell if its good or not, there are thigns that you can spot out, such as extra wear, but i have a few guys that would tell me if its good or bad....

Let me know if you need anything, pm me, no email
Prices vary greatly, let me know what you need and ill talk to a hookup of mine that will give me an approximate price...but trust me its cheaper that buying retail and will perform the same job just as well.

Let me know

Are you working with AMS from Chicago?

8)

how much for a complete 1g 4g63t head?

2g turbo ecu and wiring harness?

im not workin with AMS ;-)


all depends on the head, your lookin anywhere from 200-300 with everything you need to slap it on

the turbo ecu i dotn know how much, lookin from 75-175.

These are approximates, i wont know the exact price until i go there...let me know if your interestd.

I need to know exaclt how much for a 2g turbo ecu, engine harness and 450cc injectors with the reistor pack =D

Rob

hey that's pretty good for the head.

ideas...dohc...

ok i want a complete stock 1g head, 2g turbo ecu, and wiring harness :biggrin: get back to us once u got some definite prices https://www.thegalantcenter.org/styl...ult/tongue.gif

for the 2g turbo ecu.... without Eprom (95 and lower, OBD1) you dont really need eprom unless you want to go DSM link.... but anyways, 2g turbo ecu is anywhere from 125-150, really depends on a lot of shit, hopefully cheaper

with a 2g harness, it should be 170-190


450cc injectors without the resistor pack will go for 120-140,

resistor pack is a bitch, i wouldnt know where to find one, so im gonna give a rough price, 70-100, they go for 200 new, that is if i foudn a 92-94 dsm that would have them


all the prices are rough estimes, the price shoudl be aroudn there, could be a hella lot cheaper, or in the price range plus a few bucks. i could give exact prices once i get to the yard.

What about a 14b?

just wondering on some prices, how bout a 2g turbo exhaust mani?

2g 5spd? (id be interested in this first if u can get ur hands on one in good condition for a good price, i can even arange for a pickup :biggrin:)

hmmm, 2g hubs and rotors?

2g stock 5spoke rims?

thats bout it i guess https://www.thegalantcenter.org/styl...ult/tongue.gif

no on the trans, i dont want to sell you one thats fucked up and it woudl be hella hard to pull

wheels will be a search, so i dunno about then..i just wanna keep it strictly to motor.

2g exhuast manny is 75. depends on what place i get it from..


14b turbo would be 150, no shafy play, ill even port it if u want it

well damn how much can u get the whole 63t block for???

no way im pullin a whole block.

Offer still stands, this is only for people that are super serious and ready to dish out the cash and have the parts pulled, prices are listed in the above

sorry, wrong words.......u sellin just parts or cn i buy the whole motor???

How much for a T25.

eh like 100 or so, good condition

id get a 14b personally

well i really want a 2g 5spd thats in descent condition. the clutch can be dead, who cares ill prolly replace that anywho. as long as the tranny is in good condition i can come help u pull it some weekend :biggrin:

come june, ill come up and we can get me a head, ecu, wiring harness, tranny, and few other miscs https://www.thegalantcenter.org/styl...ult/tongue.gif

np, lemme know https://www.thegalantcenter.org/styl...lt/biggrin.gif

<div class='quotetop'>QUOTE(VegasMatt)</div><div class='quotemain'>How much for a T25.</div>
no Matt please dont get the T25. Dont make the same mistake that I did before :cry: :nono:

alright hypersilver, i NEED a 2g 5spd tranny, pedals, ect and a 1g 4g63t, wiring harness, and ecu....pull some strings for me! i can 100% come pick it up or help take it all out of the car. if u can get it for under $1200 you are the man!

o yah and the engine/tranny has to be in working order :wink:

la di da di do i found a 2g 5spd but i still need pedals, cables, ect

still in search for a 6bolt 4g63t

HOw much for just the Injectors? And Stats if any(brand, ow long they were used etc.)

I'm interested in a 2g exhaust manifold, 450cc injectors and a small 16g turbo! How much for this? and How would I pay for the stuff?