Galant 2.5 V6 tuning

Hi guys

I have a UK Galant 2.5 V6 Sport/Elegance (looks very similar to the VR4)

do you get the 2.5 V6 in the states (engine code 6A13)?

i'm looking to find out what tuning options are available and if they are suitable for my car.

Also have an Intake question- on the stock intake, under neath the plastic pipe into the airbox, there is a small plastic box or catch tank, (there is also one on the exit pipe from the airbox to engine) does anyone know what these are for and if they restrict airflow etc?

thanks again

Ritch

Hey Ritch. Welcome to TGC. We don't get the 2.5L V6 here in the states. Our options are the 6G72 for the V6 and 4G64 for the I-4. But it does sound like your stock intake is similar to ours on the V6. Those two catch cans are actually resonators to keep the intake noise down. You could conceivably cut them off as long as you securely patch the holes to prevent any leaks.

Post some pics of your car. Yours is one we don't get to see very often, and it will give us something to drool over. https://www.thegalantcenter.org/styl...ault/laugh.gif

Quote:

---

Originally Posted by Fishboy55

Post some pics of your car. Yours is one we don't get to see very often, and it will give us something to drool over. https://www.thegalantcenter.org/styl...ault/laugh.gif

---

You have seen that 6a13 at least 10 times...its my new motor https://www.thegalantcenter.org/styl...ault/smile.gif

You dont need to patch any holes BEFORE the filter - infact these will help increase airflow into the engine

any holes between the FILTER and the ENGINE will need to be securely [ideally airtightly] patched to stop dirt getting into the engine and potentially causing serious damage.

Thanks guys,
Ill take a look at the reasonateors next week and see about removing them.

I'll try and get some pics posted as well.

Quote:

---

Originally Posted by Mante

Quote:

---

Originally Posted by Fishboy55

Post some pics of your car. Yours is one we don't get to see very often, and it will give us something to drool over. https://www.thegalantcenter.org/styl...ault/laugh.gif

---

You have seen that 6a13 at least 10 times...its my new motor https://www.thegalantcenter.org/styl...ault/smile.gif

---

Yea I know I've seen the motor, I even helped push it around the garage. I wanted to see the CAR https://www.thegalantcenter.org/styl...ault/laugh.gif

See pics of my standard UK 2.5 V6 sport Galant here:


http://www.imagestation.com/album/pictures...l?id=4289198929

Ritch , have you got a Carisma as well? (nice pix BTW!)

great pics man, i'm lovin it. and i just noticed, the wheels have 4 lugs. pretty interesting.

thanx - the carisma is the wifes

damn fine car for lugging sprogs & prams about!

Dunc - did u see my reply post on the vr4 forum - with details of a 99 galant breaking in glasgow?

Ritch , yeah i did cheers , I think it may be too soon after my wheels and spoiler to afford to strip the poor beastie tho!

Peanotation
Over here it is only the VR4 8G Galant that has 5 lug wheels , all the others inc the V6 sports have 4 lug ones.

Quote:

---

See pics of my standard UK 2.5 V6 sport Galant here:


http://www.imagestation.com/album/pi...?id=4289198929

---

What year is your car? Mine's a 2001 JDM, I like the front lip on yours, very VR4ish. You can check out pics of mine on my profile link.

The only 2.5l V6 offered in the states comes in the Dodge Stratus and Avenger. The engine code is 6G73 so I dont know what the differences are. I believe your 2.5l is DOHC while the one in my car is SOHC. Check my website in my profile for an engine picture. I have a 3.0l waiting to be installed (have a pic of that too). Maybe I can give you some ideas.

Ronin
I have the 2002 2.5 V6 Sport (log book calls it an "Eleagance")
The bumper kit and side skirts are all factory standard for the UK sport models.

Yeah Dodge and Mitsu had some kinda tie up even before the Daimler Chrysler deal didnt they? I know they shared the V6 coz there was a Stratus at my Mitsu dealer here in the UK , an import in for a service , they also get a Dodge Stealth in for servicing , which I believe is a US version of the 3000 GTO. I wonder if there are any Stratus tuning parts that would fit our 2.5 Galants?

PS just looked in my owners manual , and the non turbo 2.5 V6 is a SOHC unit , i think its only the 2.5 TT in the VR4 which has twin cams.

If you have the 2.5l SOHC 24V V6, then the best thing to do would be to drop in the 3.0l SOHC 24V V6 from late model Galants. Its a direct swap.

It would be an idea for sure , if we got that car here! Unfortunately we only get 2.0 I4 , 2.4 GDI I4 and 2.5V6 , no 3.0 DOHC V6 (unless another UK spec Mitsubishi uses it , im open to ideas from the UK guys on that one!)

shogun?
the old sigma had a 3.0 v6
but it only pushed out 168bhp

It's a shame you can't shoehorn the 4.5L V8 from a Shogun in there really :twisted: :roll:

Ahh the Sigma , a car i thought was fantastic on its 1991 launch! I had a breif drive of my dealers demo back then , a black saloon with leather , it had a superb cd stacker stereo! You never see them now , not even the estate , which outlasted the saloon by quite a while in the UK.

nice motors - all the toys & leather
can pick them up with 100K+ for under a grand
only prob is they have many electrical bits & bobs that if something goes wrong it costs more than the car is worth to fix.

nice old bus though!!

Quote:

---

Originally Posted by Dmac1969

It would be an idea for sure , if we got that car here! Unfortunately we only get 2.0 I4 , 2.4 GDI I4 and 2.5V6 , no 3.0 DOHC V6 (unless another UK spec Mitsubishi uses it , im open to ideas from the UK guys on that one!)

---

This engine also comes in the Mitsu Eclipse and the Stratus/Sebring coupe. You'd want the SOHC version. I could tell you more if I could see a picture of your engine.

Sorry Mank , i meant to say 'no SOHC ' not DOHC!! We dont get the Eclipse here either , and the only Stratus/Sebrings around are a handfull of personal imports , most of which are down south.

6A13 2.5L V6 24 valve??

might same motors as the indonesian version of mine..

also the 114,3 PCD x 46 wheel offset, 4 lug nut for the wheels... https://www.thegalantcenter.org/styl...ault/smile.gif

check it out:
http://i86.photobucket.com/albums/k1...a/2fd331f1.jpg
my 6A13 motor

Want to add a "TT" code for my next project https://www.thegalantcenter.org/styl...lt/biggrin.gif hehehehe