Vaccum Gauge

So i installed a Vaccum Gauge on my 7G, it's connected on the EGR my engine is a 4G93 SOHC Carburetor

https://lh5.googleusercontent.com/Ld...r4utZjXFhw0OCw
On the manifold you can see the EGR Port next to the PVC Port.

https://lh3.googleusercontent.com/l4...gE0AKVC_NUcJMA
the EGR Valve with four screws.

https://lh5.googleusercontent.com/t_...gY8BoR5qTKFKtA
the hose was too long and at the end had a crimp..so i cut it a bit.

https://lh5.googleusercontent.com/Vi...rVuBDMmf3kQ4jw
T-Fitting one end running to vaccum gauge the other EGR Port on Manifold to EGR Valve.

https://lh5.googleusercontent.com/eQ...UwVsaxl1P9vqgQ
The hose running to the Gauge i loomed to protect from heat etc.

https://lh5.googleusercontent.com/JW...x8tx9Q4Osi54cQ
Vaccum Gauge tested and works ok.