Whats the safest stuff to use to clean the engine bay?
Printable View
Whats the safest stuff to use to clean the engine bay?
I spray simple green max all over it, cover the air filter if you have aftermarket filter and scrub what you can with a soft brush, i use a painter brush to get in all cracks and stuff and just hose it down after. If you have air compressor, blow all the water off and out of cracks and electrical conecttions and you are good to go.
Yea i use simple green, and i use this engine bright thing from pepboys comes in orange can
That engine bright works but not that good, speacialy on a dirty engine bay.
Try this next time. Cover your air filter, high pressure wash the bay with no soap or anything. Let it dry for a few minutes, next, get the foamy tire cleaner that comes in the aerosol cans, spray everything in the bay with it, close the hood, go drive around for 15-30 minutes. The tire cleaner will clean anything it touches and will bake itself off after the drive. Lastly just go wash the bay once more with a pressure washer and it will look good as new.
I also got all this adhesive and some double stick tape left from my hid ballasts and ignitors. How do I take this stuff off?
seriously? this stuff wont corode the bay with the baking action?Quote:
Originally Posted by seth98esT
will this even work for 12 years worth of caked on greese? My 2g has maybe 2mm worth of grime caked on the lower parts of the engine bay.
Hmmm I've always used simple green and low pressure water. pressure washer under the hood seems scary, but it makes sense. That foaming tire cleaner is silicone based, so that'll dissipate. What about a residue?Quote:
Originally Posted by qnz
If your bay is extremely dirty, it wont help out a ton. You can do the simple green first, then the tire foam next, it can get into crevices that you cant get to with a brush. I probably wouldnt use a pressure washer on high. Ive always went to the car was and used the pressure washer there without pulling the trigger handle to make it extremely high pressure.
I use four things, a degreaser called Go-Grease, really strong stuff, made for tractor engines and such, it foams and sticks, then I use the Brillo pad to get into smaller places, a stiff bristle brush for the block, and a towel to wipe everything dry. I just cleaned up my bay a little when I installed my strut tower bar, but I didn't have time to scrub, so I just foamed it up and then hosed it of, and it got damn near everything off, I had at least 2-3mm of gunk all over. Here are some pictures
http://img179.imageshack.us/img179/1...0239cp4.th.jpg
http://img515.imageshack.us/img515/2...0238fr6.th.jpg
http://img237.imageshack.us/img237/3...0241zm2.th.jpg
http://img179.imageshack.us/img179/5...0237jm9.th.jpg
If any of you guys want some of this, I have a ton that I bought from my friends that lives on a farm, let me know, I can sell you some.
I just did exactly what you said and it came out great, thanks for the info!Quote:
Originally Posted by RAZ_76
No problem.
simple green and pressure washer...does wonders
http://i143.photobucket.com/albums/r...1/DSC00536.jpg
i thought using a pressure washer at the car wash was a crazy thought as well and my friend convinced me that it wasnt so we tried it, i bought this cleaner called Cherry power from autozone and used it, didnt dilute it as the directions said since i wanted it to be more concentrated, sprayed it all over the bay after we covered the filter and then scrubbed some of the dirt off and used the high pressure washer at the car wash and everything came out nearly as clean as new and everything worked fine after that with no problems, now if u have some old vaccum lines or old loose wires then u might have a problem but i didnt