D2 RS Coilovers Question

So I order a 9G Galant specific application of the D2 RS Coilovers and their application for those use the OE Rear Top Mounts. The fronts have Camber Plates already attached so no issue there. The more I look at the diagrams the parts and ask around the less it makes sense. I called D2 and they confirmed it doesn't come with Top Mounts and that it should use the existing OE Rear Top Mounts. Just wondering if I'm missing some parts or need to order something.

Rear Strut
http://i.imgur.com/pL5WR57.jpg

Included Equipment
http://i.imgur.com/Jj6nG8m.jpg

Diagram for Installation
http://i.imgur.com/qaxyaBQ.jpg

Sounds right. Some coilovers use the stock "hats". On my Tein Basic Coils I had to use all four stock mounts at least you got the fronts with camber plates too.

If you rather not take the oem struts just get new ones. Those things have bushings that wear and dry out anyway so its good to replace.

Ok so what I find for replacement is only 4 parts for the OEM Struts.

http://www.rockauto.com/catalog/more...726&cc=1428331

Is this the only kit I need to replace the bushings? Or would I still be missing something?

Looks right. The rear strut bolts into the body. The bushing serves mostly as a spacer.