Printable View
Something seems really strange. The cap all the way to the left will not go down all the way no matter what we do. We had a 300LB cop next door try to shut it for us and it wouldn't budge any further down. Should I just replace it?
Also, are the wires arranged right?
http://i25.photobucket.com/albums/c6...0606091251.jpg
http://i25.photobucket.com/albums/c6...0606091252.jpg
Ommfg!
wait what???
dude.. arent those individual coil packs? If so why does 3 go to 1?
Yea that's what i was wondering. can you help me out with the right way?
it looks like a coil on plug waste spark set up to me. as for the boot thats not fitting correctly, the plug in the boot may not be seating on the nipple of the spark plug properly. does the car start or run properly.
Mines are setup the same way. I had the same problem with 1 being not fully inserted. My car was fine, but I changed the wires and it stayed shut.
the wires are in the correct places but I think the length is off.
i know exacly whats wrong,give the wire coming ot the top a tug, the connecter get pulled down a bit inside the tube when you remove it, same thing happened to me
And this contributes to the thread how?Quote:
Originally Posted by ricky_db
well did it work
Unfortunately it didn't. I'll buy some NGK wires soon.Quote:
Originally Posted by JoeRad
Is that a big hole in your intake manifold? (2nd Picture top left corner)
looks fine to me.... actually mines looks the same...!!
it is a shiny weldQuote:
Originally Posted by CodyF