Prophet good instructions/pictures but a few things should be mentioned on this for newbee's.
First is they dont need to remove the Caliper Bracket off of the wheel hub. The two shorter screws can be left in. The caliper & rotor will come off with out removing the caliper bracket.
Second is they should by new hardware for the caliper brackets or clean and grease up the old hardware, so the new pads will seat good. Better to buy new hardware being it is only 7 to 15 bucks depending on where you buy it.
See this pic link
http://s1085.photobucket.com/albums/...8G_brake05.jpg
The other is I have never known someone to grease the back of the pads. I am guessing you are doing that to hold the pad shims in place until you put the pads back on?
That might work, But they actually have a spray/glue that they have for that.
But most new pads should have new shims already attached to them.
