I've got an 03 2.4. My ballance shaft belt broke and destroyed the crank sensor and plate. I replace both belts the crank sensor and plate. Got it back together and it only runs on 2 cylinders. One coil hAs spark but the other one has no spark. I then replaced the bad coil with same results. Only one coil has spark.
I then went back and checked all my work and decided to replace the crankshaft position sensor with another new one.
Now neither coil has spark.
When only one coil had spark the engine would run, but only on 2 cylinders.
What can cause it to loose both coils?
Please help
