Printable View
I had to pull my engine and rebuild it. I put it all back together and that one plug doesn't seem to go into anything O_o
It's behind the intake manifold. It's right next to the alternator plugs.
Car runs, but I assume what ever that plug goes to would help it run better =p
picture is kinda large, sorry.
http://stfucrybaby.com/plug.jpg
That looks like its for the egr solenoid. The solenoid is the same color as the plug and should have two vacuum lines hooked up to it also.
That is exactly what it is! ThanksQuote:
Originally Posted by M-Rod
No problem.
Tell me I'm not crazy. There is no plug on my EGR sel..
http://stfucrybaby.com/egr.jpg
It should connect under it, soliniod might be broke
Sent from my PG86100 using Tapatalk 2
It has to have the socket check if its pointing to the driver side of the car
Crazy. Every single one of these I have ever seen has the pigtail connect on the same side as the upper vac hose. However, those have all been on the V6 and I'm not familiar with the 4 cylinder. I would be under the impression that either engine uses the same solenoid though since it theoretically does the same thing regardless of engine size.