Trying to pimp Brake Calipers

Hey guys, just a quick question i picked up a set of 2 piston calipers and want to paint or powdercoat them. I really want to powdercoat them but myself. Just get the stuff from Harbor Frieght and try it out. Any experience with doing this? Thanks guys

For the love of all that is not tacky, stay away from bright colors. Our little two pot calipers aren't worth drawing attention to.

That said, I used a brake caliper paint kit from Autozone on the 2-pots in my old Talon. I went with black and it looked fine years later when I traded it so I could build my Galant. Like any painting job the prep work is everything. I took a wire wheel to mine to clear off any grime and rust and then washed them thoroughly with degreaser before I painted them.

You understand powder coating requires a baking prosess.

For just normal two pot calipers, regular paint should suffice. Duplicolor makes a great ceramic paint kit. Most stores only carry red and black on hand, I'm not too sure of all the colors Duplicolor possibly offers through their distributors directly though.

Caliper paint from Autozone I did mine silver n black.

Quote:

---

Originally Posted by deeznutz

You understand powder coating requires a baking prosess.

---

Yes sir

Quote:

---

Originally Posted by Skyforger

For just normal two pot calipers, regular paint should suffice. Duplicolor makes a great ceramic paint kit. Most stores only carry red and black on hand, I'm not too sure of all the colors Duplicolor possibly offers through their distributors directly though.

---

Yeah, ive painted calipers on my scion when i had it but just wanted to try and experiment since they are already off the car and have time to mess with them.

Just rattle can them real clean.

as stupid as some might think.

why not go brembo's? easy enough conversion.

^^^Maybe it's the price tag that comes wit brembos? Shit ain't cheap yo!

because most brembos are around $500 to $600 for a set, AND you more than likely have to repaint them also, and THEN you need wheels and/or spacers to clear the wheel spokes. its not a simple bolt on and go kinda thing, well the calipers are, but the requirements aren't

Since you have them off you might as well try to powder coat

To powder coat them u need to buy a rebuild kit. And take the pistons out and seals and all.

Also for powder coat them u could use a toaster oven if u don't have a 220v hook up in your garage to accommodate a full size kitchen oven.

Up to which route u wanna go.

Quote:

---

Originally Posted by spdracr

To powder coat them u need to buy a rebuild kit. And take the pistons out and seals and all.

Also for powder coat them u could use a toaster oven if u don't have a 220v hook up in your garage to accommodate a full size kitchen oven.

Up to which route u wanna go.

---

I wanted to rebuild them any ways. Ive read the thread somewhere of how to rebuild em floating around on here

Quote:

---

Originally Posted by deeznutz;7299.79

^^^Maybe it's the price tag that comes wit brembos? Shit ain't cheap yo!

---

Yes sir that is a bit of price tag that im not ready for yet lol

Quote:

---

Originally Posted by mrg7243

Since you have them off you might as well try to powder coat

---

And thats my same thought. Still dont know but im leaning to powdercoat just cuz.

Here is a lil motivation for u.
http://i233.photobucket.com/albums/e...02689411_o.jpg
http://i233.photobucket.com/albums/e...51723180_o.jpg

The bracket was the very first piece I ever powder coated and I didn't spray enough on it so it was still texted. The color is wagon red

The breaker bar was my second part and came out much much nicer. The color is battleship grey.

Powdercoating isn't hard. Just time consuming.

G2 caliper paint kit (two coats, brushed on). Three years later and it still looks just as good.

http://i416.photobucket.com/albums/p...0408091426.jpg
http://i416.photobucket.com/albums/p...boy/7i7ui7.jpg