dam, now im gonna be checkin this thread 20times a day lol. I wish i had a shop to work on my car at. Goodluck bro
Printable View
dam, now im gonna be checkin this thread 20times a day lol. I wish i had a shop to work on my car at. Goodluck bro
3-4 since I have never done one before and I read like 3 different tutorials. but the slight difficulty would go up to a 5-5.5 if I didnt have the correct tools and lifts....
yeah its pretty sickk I didnt even think about it until he offered to me to use the shop and I was like DUHHH.... -_- but yeah thanks dude!
sooo.....
The Swap: Day 2
What I think of the fat biotch! HAHA
http://i9.photobucket.com/albums/a84...F0594Small.jpg
http://i9.photobucket.com/albums/a84...F0597Small.jpg
So I took off my flexplate and threadlocked the flywheel bolts and was putting on the flywheel and wow it was THE WRONG ONE!!!!! WTH the bastards on ebay I bought from sent the wrong bloody one.....emailed them and was pretty pissed because I was planning to have the car done today....yeah right...but luckily for me my father in law got mad hook up and found me the whole oem clutch kit for $50 bucks and will be here in the morning. My previous clutch kit had a lightened flywheel and a slightly above oem clutch....but err $350 or $50 bucks. Yeah $50 bucks. I will upgrade when I eventually boost her.
http://i9.photobucket.com/albums/a84...F0595Small.jpg
http://i9.photobucket.com/albums/a84...F0600Small.jpg
So since the whole clutch kit ordeal I cleaned my whole center console and installed the shifter and cables......wow.....the nut on the left (see borrowed pic from goosey's thread) is a BITCH to get out....took forever!
http://www.vertsoft.com/cars/images/...P055_SMALL.jpg
http://i9.photobucket.com/albums/a84...F0598Small.jpg
Installed the manual's motor mount....
http://i9.photobucket.com/albums/a84...F0599Small.jpg
Once again....she sits.....damn you ebay a-hole seller
nice job on the car bro, wish i can do a swap on mine but my wife drives my car and it will suck on traffic.
nice bro...your going to love it after the swap ;)
holy shit dude!! I wish I was you right now! and for someone whos never done a swap before you are moving pretty quick man!
good luck with the rest of it bro!
Nokcy: Thanks dude, and for some reason I think I wont mind the clutch and traffic and besides it will be WAAAY better on mpg
Fatal: I know right?! I am trying to be as calm as possible and take my time.
Jigz: Thanks bro, man I was so tired of seeing everyone do something sick so I was like ramen noodles here I come...at least my ride will make me happy while eating em :) haha
Wow I dont think I am moving quickly at all but then again.....it is just me....LOL!
Alrighty so
The Swap: Day 3
Started the morning off by going and picking up the $50 clutch kit which the pressure plate and flywheel were in good shape but the whole thing was bolted together so when I got back to the shop I seperated the pieces and took a look at the clutch and that crap was done.....I was like is this a clutch or is it a freakin oversized cracker? I didnt even bother taking a pic of that lol. So I needed a clutch still and father in law again with mad hookup got me a brand new Exedy pressure plate, clutch, and TOB for $147. So I was all set for the day.
http://i9.photobucket.com/albums/a84...F0601Small.jpg
So while I was waiting on the exedy stuff I resurfaced the old flywheel ...
http://i9.photobucket.com/albums/a84...F0603Small.jpg
Went and picked up the clutch kit, and installed it right away.
And just in case its not a well known fact...the automatic has a flexplate adapter plate that is the same plate you use for the flywheel. one catch though; the 3g m/t has TWO flywheel adapter plates. One on the crankshaft bushing, so between the bushing and the flywheel. And another plate one the flywheel...and then you put the bolts in. Mind you you have to align all the plates and the flywheel since all the holes will only fit in one direction! That flywheel/flexplate adapter mitsubishi part number is MD754228 for future reference just in case. god bless CAPS. lol
http://i9.photobucket.com/albums/a84...F0604Small.jpg
So after everything was installed I got the tranny and the stand out and proceeded to put er in!!
And Magic happened!
http://i9.photobucket.com/albums/a84...F0605Small.jpg
http://i9.photobucket.com/albums/a84...F0609Small.jpg
Ran the clutch line.....connected the shifter cables & the ground back to the tranny
http://i9.photobucket.com/albums/a84...F0608Small.jpg
http://i9.photobucket.com/albums/a84...F0610Small.jpg
Then shorted out 9+10 on the black harness
http://i9.photobucket.com/albums/a84...F0606Small.jpg
And that ended day 3. All that is left to be done is getting putting the gl-4 in the tranny, putting the other two tranny mounts back in, the axles back in, suspension back together, bleed the clutch line, put the battery & intake back in, wheels back on, then record the first start up....and wait for my ecu to throw the code "5 spd hawtness" LOL!
nice nice cant wait
you just going to run with the CEL/SES??
me either!!
yes and I am going to try to figure out how to bypass it for all of us 02-03 guys
haha I lol'd when I wrote that....and gawd I cant wait to feel the difference.....but lame thing is the clutch has a 750mi break in period.......-_- GHEY!!!! well I will be taking my car everywhere....then I will have to do some power shifting to see if I can get some tire spinage!
btw, when the trans was out, what was holding the motor up? you just let it hang on the mount?
did you ever wonder why they cut your road up and put that black stuff down? ive nver seen a road that bad lol
anyways, nice build your car is my fav white G for sure
Wow Ivory8g!
Can't wait to see the finished product!
nice work dude, can't wait to see it done.
Thanks peeps!! Your enthusiasm keeps me motivated!!!!!!
So short update:
I am pretty sure the master cylinder's seals took a dump because there is no feel in the clutch. so I took off the line along with the reservoir and the fluid came out immediately. But I took out the clutch line out of the master cylinder and there was nothing -_- BAH I'm tired today and just didnt want to be bothered so I will deal with it tomorrow. :( I really wanted to drive it today.....looks like my game is going into overtime fellas :P
P.S. I will have pics up tonight as usual....
Keep the pics coming bro.. Very good progress so far.
The Swap: Day 4
Well my father in law were the only ones running the garage today so I barely got anything done. Should have been done today but yeah didnt happen.
http://i9.photobucket.com/albums/a84...F0611Small.jpg
Everything is back in....
http://i9.photobucket.com/albums/a84...F0612Small.jpg
Only the axles remain to be put in...and I had to get new boots for them both because they were TORN! wth......
Yea so I ghetto zip tied it until tomorrow so I can put some clamps on them.
http://i9.photobucket.com/albums/a84...F0613Small.jpg
and my master cylinder is gone....so tomorrow I am going to test it to make sure. and then replace it if needed, then fire it up!
Sorry to criticize bro, but you couldve done a lil better job joining the lip. I can tell the where its been modified.