I've installed my Navigation deck, but I'm having trouble locating or figuring out where the wires and what the colors are for the Vehicle Speed Sensor and also Reverse Light. This is for a 9th Gen. (2010 ES)
Thanks in advance
Printable View
I've installed my Navigation deck, but I'm having trouble locating or figuring out where the wires and what the colors are for the Vehicle Speed Sensor and also Reverse Light. This is for a 9th Gen. (2010 ES)
Thanks in advance
in 2010 there is no wire from a speed sensor. With the transmission wire goes in the ECU. Further on the CAN bus. I have a set of navigation, as well faced with this problem. Signal is required if you двигаешся in the tunnel or the mountain. In other cases, signal coming from space satellites. Navigation works well.
Speed Sense
yellow/black
ac
PCM, black 18 pin plug, pin 14
Info straight from Directechs
actually it can. Have used that same wire in at least a dozen 9th gen galants for one of the not so local mitsu dealers.
Ok...thanks for the info. What about the color and location for the Reverse Signal wire?