The Galant Center - Powered by vBulletin

Thread: New bulbs...

Showing results 1 to 4 of 4
  1. #1
    Supernova
    Guest

    New bulbs...

    You know the speed at which the stock turn signal bulbs blink when you turn them on? Ok... well. I put in new APC bulbs(the ones that are clear that glow amber). And they blick like, 3x's faster. Is it ok for them to blink that fast? Will they burn out fast or somthing? Or are they supposet to blink this fast?

  2. #2
    are you talking about the LED bulbs or the Titanium bulbs. if its the LED, its supposed to blink faster. if its the Titanium, its supposed to blink normal

    Webhosting for less than $3 a month? put "pinoyesv6" as a promo code.

  3. #3
    Official TGC Pop-Pop Fishboy55's Avatar
    Join Date
    07-31-2002
    Location
    Baltimore, MD
    Posts
    2,848
    You have one of two problems; either the bulb is in backwards (less likely) or the contacts in the socket are pushed down too far. Take a small screwdriver and gently pry both contacts up then insert the bulb. That will work 95% of the time. If neither of those work, you have a bad bulb.

    Chip
    Chip

    2000 Basalt Black Metallic GTZ
    (Paint Code: Porsche LC9Z)

    Genuine experience carries a lot more credibility than the ability to answer a question.


  4. #4
    Supernova
    Guest
    <div class='quotetop'>QUOTE(pinoyesv6)</div><div class='quotemain'>are you talking about the LED bulbs or the Titanium bulbs. if its the LED, its supposed to blink faster. if its the Titanium, its supposed to blink normal</div>
    Yes, they're LED. So its all good then I guess.

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •