The Galant Center - Powered by vBulletin

Thread: is it worth it?

Showing results 1 to 8 of 8
  1. #1
    Galant-UNIT(sur_texas)
    Guest

    is it worth it?


  2. #2
    You are here entirely tooo much!! peanotation's Avatar
    Join Date
    12-17-2002
    Location
    Sherman Oaks, California
    Posts
    4,304
    <div class='quotetop'>QUOTE</div><div class='quotemain'>Boost: 6 PSI
    HP Gain: 56% Increase (safely on stock engine)</div>
    i only know the basics of turbo....but 6psi gives you 56%????
    also, 56% increase on a stock engine? how is that safe? turbo guys, help out here
    http://socallifestyle.com/

    1994 Galant GS 5spd

  3. #3
    sethmo
    Guest
    T2small. I wouldnt touch it.

    they claim 300+hp, not on any i4...

  4. #4
    brandon
    Guest
    Not to mention you can put together your own kit for a LOT less.

  5. #5
    ken inn
    Guest
    they are not claiming 300 hp. they are saying the tubocharger is capable of 300 hp. the increase is 56%, which is about right. general rule of thumb is 1 lb boost=10hp/tq. an intercooled turbo setup at 6 lbs boost, 56% hp increase is about what you get.

  6. #6
    Galant-UNIT(sur_texas)
    Guest
    what about these one


    http://linux.forcedperformance.net/merchan...y_Code=DSM-TPkg

    kit comes with

    -ported EVO III Big 16g turbo
    -ported EVO III O2 Housing
    -complete gasket set
    -stainless steel oil supply line kit
    -CNC oil drain line
    -Walbro 255lph high pressure fuel pump
    -fuel pump kit
    -Joe P manual boost controller

    for $1,095.00

  7. #7
    Mindless
    Guest
    <div class='quotetop'>QUOTE(Galant-UNIT(sur_texas))</div><div class='quotemain'>what about these one Â*


    http://linux.forcedperformance.net/merchan...y_Code=DSM-TPkg

    kit comes with

    -ported EVO III Big 16g turbo
    -ported EVO III O2 Housing
    -complete gasket set
    -stainless steel oil supply line kit
    -CNC oil drain line
    -Walbro 255lph high pressure fuel pump
    -fuel pump kit
    -Joe P manual boost controller

    for $1,095.00</div>

    You'd still have to buy an IC, IC piping, and some other stuff I'm not to sure of.

    Brandon, if you don't mind me asking how much have you invested so far in your setup? And how much more do you need to spend to make it complete. That will probably give G-unit a better idea of the cost.

  8. #8
    Guest
    <div class='quotetop'>QUOTE(sethmo)</div><div class='quotemain'>T2small. Â*I wouldnt touch it.</div>

    lol...FP-3065 pwns you.

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •