whats wrong with tires sticking out?

[The F.B.I]

looks like someone in vegas beat you to it!!!11!

damn i thought i'd be the first...its ok...im tryna go 17"s with a 35offset will that work could i go lower im drop 2in in the back

[ChikagoGTZ]

You guys have all seen the pics on my car, it makes the car look very aggressive.

[The F.B.I]

You guys have all seen the pics on my car, it makes the car look very aggressive.

i havent. do you have a cardomain? i wanna see

[ChikagoGTZ]

You guys have all seen the pics on my car, it makes the car look very aggressive.

i havent. do you have a cardomain? i wanna see

http://www.cardomain.com/ride/2302599

[The F.B.I]

i like your philosophy

[Reelax]

umm, in case you guys didn't know, the JDM 8G and the USDM 8G don't have the same suspension and so fitament may not b exactly the same for clearance of the fenders and suspension parts.

i am running 19"x8.5" VOLK RACING SF-WINNING +48mm droped on TEIN SS-P w/ all 4 corners corrected for camber w/ 225/35zr19's. the rear fenders had to b almost completely cut out, not just rolled.

these are old pics but notice the drop and clearance:

[ChikagoGTZ]

I just rolled my fenders the ghetto way, but it cost me $15.45...since I dont own a baseball bat

Parts: 9.99 heat gun from Harbor Freight
5.45 1.5 inch PVC pipe (10 feet, you only need 2.5)

I just jacked the car up a little until I could fit the pipe in the gap. I heated the fender area up for about 5 minutes and then started to slowly roll it evenly from one side to the other, applying heat after each pass. As I got it rolled back I'd let the car down a little and then continue. I didnt roll them completely flat but still have good support in the fender. I drove the car really hard on several corners and didn't hear a single rub....so I'm good.

I'm not going to suggest anyone does this, since it's possible to screw stuff up. I'm going to repaint my fenders inside just to make sure I dont have any cracks that will rust...

[gravy]

<div class='quotetop'>QUOTE(The F.B.I)</div><div class='quotemain'><div class='quotetop'>QUOTE(krispy03)</div><div class='quotemain'>looks like someone in vegas beat you to it!!!11!

</div>

damn i thought i'd be the first...its ok...im tryna go 17"s with a 35offset will that work could i go lower im drop 2in in the back</div>

You serious?

1)for the most part 17 look small on an 8g2) A 35m offset is kind low. 3)Putting 100-150 spoke rims on a G :laughing: But its your car so do what you want

[The F.B.I]

<div class='quotetop'>QUOTE(gravy)</div><div class='quotemain'><div class='quotetop'>QUOTE(The F.B.I)</div><div class='quotemain'><div class='quotetop'>QUOTE(krispy03)</div><div class='quotemain'>looks like someone in vegas beat you to it!!!11!

</div>

damn i thought i'd be the first...its ok...im tryna go 17"s with a 35offset will that work could i go lower im drop 2in in the back</div>

You serious?

1)for the most part 17 look small on an 8g2) A 35m offset is kind low. 3)Putting 100-150 spoke rims on a G :laughing: But its your car so do what you want</div> daytons are as G as can be. chrome is for the ballahs, and playas, and the rest just don't fit me[
] right, not that there ugly just dont look right to ME... plain T, dickies, and some cortez's or chucks cuz thats how we G's do it in daygo 8) but what do you like? are you a G? A Ballah? a Playah? Racer? cuz it all go's back to what you want? but it's allways good to hear others opinions

[Tech_Greek]

DeDeDeh!

Ever seen an big truck tire explode beside your car? It's loud, it usually breaks some part of your car.

Imagine that if you tires stuck out past the fenderwell just twice as bad because it's literally RIGHT next to your car and would cause damage.