The Galant Center - Powered by vBulletin

Thread: tranny swap

Showing results 1 to 10 of 10
  1. #1
    56chop
    Guest

    tranny swap

    can you swap a auto for a five speed in the 4cyl model if what are the things that ill need as far as parts and what car do i get a tranny from

  2. #2
    datdude305
    Guest
    wow i went through that 2
    www.carparts.com for all the parts junkyards are the shit look 4 the 3g eclipse tranny 2.4 liter engine

    and the list gose



    Manual Transmission
    Shifter Assembly
    All shift linkage and cables
    Clutch pedal
    brake pedal (brake pedal is smaller on a 5 speed car)
    clutch master cylinder
    clutch slave cylinder
    flywheel
    starter (not sure if 5 speed starter is different from auto, check mitsu part#'s to double check)
    clutch
    factory throw out bearing
    Axles
    All fluid lines for clutch master + slave cylinders
    Manual eclipse GT ECU

  3. #3
    Experienced TGC Member
    Join Date
    05-14-2003
    Location
    Southern California
    Posts
    1,404
    I dont think you need the ECU. VTECKiller did the swap without touching the electronics.

  4. #4
    Yeah, he's said before no ECU necessary.

  5. #5
    8ggalant
    Guest
    he also has a 4 cyl....that post was obviously for a 6 since he said v6

    as far as i kno the 6 does need the ecu...but vtec may need to confirm this

    or u could just search on www.eclipseforums.org

    i kno for a fact the 4cly doesnt...im starting that swap tonite

  6. #6
    who said V6? Did I miss something?

  7. #7
    b-boy_sky
    Guest
    I thought for sure you needed to swap the ecu's. I just might put a little more research here and do the swap myself....

  8. #8
    8ggalant
    Guest
    from my "limited research" only the v6's need the ecu swap...2 members have done the 4cly swap with out it....

    and someone above said sumthin about a "GT" transmission...so thats why i started talkin about v6's (that is the 6cly model of the 3g eclipse btw :? )

  9. #9
    56chop
    Guest
    so how much am i looking to spend on this whole swap

  10. #10
    8ggalant
    Guest
    down to the gear lub i just bout i spent right @ 1k including all parts, gettin the flywheel resurfaced, short shifter, shit knob, gear lube, oil and filter for an oil change, and brake cleaner ( so needles to say its well under 1k...probly mid 9, so around 950

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •