The Galant Center - Powered by vBulletin

Thread: bov

Page 4 of 7 FirstFirst 1234567 LastLast
Showing results 61 to 80 of 129
  1. #61
    Ok, first of all, I've seen alot of DSMs, and I've never seen a 9-bolt rear.... I dont even think you know where the 9 bolts are located. So, tell me that and I'll try to figure out what you are talking about.
    <img>

  2. #62
    Guest
    <div class='quotetop'>QUOTE(ChikagoGTZ)</div><div class='quotemain'><div class='quotetop'>QUOTE(scootinintegra)</div><div class='quotemain'><div class='quotetop'>QUOTE(ChikagoGTZ)</div><div class='quotemain'>Yeah, basically, it's bad and he's full of shit?</div>
    More or less. Somebody find me a compressor map for a damn GT30R. I'm retarded and can't get one. Also, Sabzi, where did you find that fuel-hp calculator? That'd be nice to add to my repertoire of tuning tools.</div>

    Scoot, I think this is the eq. for fuel-hp calculations....I've got a comp. map also somewhere....

    hp x BSFC (Brake Specific Fuel Consumption)
    ______________________________________ = lbs/hr per injector

    no. of injectors x duty cycel (eg. .85 = 85%)

    Take lbs/hr and multiply by 10.5 to get cc.

    And is this the map you need?

    http://www.majesticturbo.com/images/20272-lr.jpg</div>
    yeah, I know the equation. I just didn't know if there was a program that did it faster

  3. #63
    It's called a calculator....
    <img>

  4. #64
    Guest
    <div class='quotetop'>QUOTE(ChikagoGTZ)</div><div class='quotemain'>It's called a calculator.... </div>
    You know I'm too lazy for that.

  5. #65
    Want me to write a freaking program in Perl for you?
    <img>

  6. #66
    1166gvr4
    Guest
    YOUR A MORON you have never seen a 9 bolt rear HOW ABOUT THE 10000000000000 FORD'S THAT CAME FACTORY WITH THEM. AS FOR WHERE THE BOLT'S GO IDK WHAT THE FUCK IS SUPPOSED TO HOLD THE CHUNK ON THE CENTER SECTION MAYBE ILL TRY TO GLUEIT .WHERE ARE YOU GETTING GT30 THEY CAN BARLEY MAKE 700 CRANK HP THE BLOWER ON THE 90 TSI AWD LIKE I HAVE SAID 900000 TIMES WAS A PERCISION PT 74 GTQ YOU DONT LISTEN TO TOO BUSY WITH TRYING TO MAKE YOURSELF LOOK LIKE AN ASS. sorry piss ants i am never wrong

  7. #67
    <div class='quotetop'>QUOTE(1166gvr4)</div><div class='quotemain'>YOUR A MORON you have never seen a 9 bolt rear HOW ABOUT THE 10000000000000 Â*FORD'S THAT CAME FACTORY WITH THEM. AS FOR WHERE THE BOLT'S GO IDK WHAT THE FUCK IS SUPPOSED TO HOLD THE CHUNK ON THE CENTER SECTION MAYBE ILL TRY TO GLUEIT .WHERE ARE YOU GETTING GT30 THEY CAN BARLEY MAKE 700 CRANK HP THE BLOWER ON THE 90 TSI AWD LIKE I HAVE SAID 900000 TIMES WAS A PERCISION PT 74 GTQ YOU DONT LISTEN TO TOO BUSY WITH TRYING TO MAKE YOURSELF LOOK LIKE AN ASS. sorry piss ants i am never wrong</div>

    Oh, I know all about a 9-bolt rears, but again, they do not go on DSMs...what vehicle did your rear end come off of that you "supposedly" put on your car? I'd like to see a ford rear end on a DSM.
    <img>

  8. #68
    1166gvr4
    Guest
    and by my calculations being what i know. two 990 cc injectors can easily produce enough fuel to make 1000 wheel hp hmm how much math did that take none. why you ask. because i dont read up on shit i know what works and what doesnt your all sitting here oh man this is so fun we are little fucking nerds lets try to use the wonders of science to prove this guy who has been doing this work for years wrong. and my calculations also predict that your ass a bunch of 18 year old fags who beat off to a mental image of your mother. do the math it all adds up then say oh shit this guy was right. maybe he is an ok guy. at that point i will say shove your calculations up your loose ass and lick my dogs taint while fisting your 3 year old sister. omg where do i come up with this. i am too old for this i am going to die laughing at you little pecker heads

  9. #69
    2 990s make over 1000???
    <img>

  10. #70
    Guest
    <div class='quotetop'>QUOTE(1166gvr4)</div><div class='quotemain'>LIKE I HAVE SAID 900000 TIMES WAS A PERCISION PT 74 GTQ YOU DONT LISTEN TO TOO BUSY WITH TRYING TO MAKE YOURSELF LOOK LIKE AN ASS. sorry piss ants i am never wrong</div>

    <div class='quotetop'>QUOTE(1166gvr4)</div><div class='quotemain'> anyway i was in my warbird 751 whp 90 tsi awd talon 2.2 ffwd connection xp stroker gt 30 r turbo and the list list goes on and on and on anyway. </div>

    oopsies. Somebody made a boo-boo.

  11. #71
    Guest
    <div class='quotetop'>QUOTE(1166gvr4)</div><div class='quotemain'>and by my calculations being what i know. two 990 cc injectors can easily produce enough fuel to make 1000 wheel hp hmm how much math did that take none. why you ask. because i dont read up on shit i know what works and what doesnt your all sitting here oh man this is so fun we are little fucking nerds lets try to use the wonders of science to prove this guy who has been doing this work for years wrong. and my calculations also predict that your ass a bunch of 18 year old fags who beat off to a mental image of your mother. do the math it all adds up then say oh shit this guy was right. maybe he is an ok guy. at that point i will say shove your calculations up your loose ass and lick my dogs taint while fisting your 3 year old sister. omg where do i come up with this. i am too old for this i am going to die laughing at you little pecker heads</div>
    Holy shit you're so wrong. Your shop must have gone under like what, 2, maybe 3 weeks after opening?

  12. #72
    I thought it was:

    as far as parts FFWD connection 2.0 race motor level 4.5 head
    <img>

  13. #73
    1166gvr4
    Guest
    i dont give a shit what you have seen go to dsm shootouts real dsm meets you will see some of the craziest shit you have ever seen like i bet you have never heard of bolting a turbo 350 tranny onto a 4g63t have you no,does that mean its never been done hell no because it has been done hundreds of times if you think a 9 inch rear wont go onto a dsm your a moron and you dont know shit. honestly i dont give two shits what you have seen obviously you have not seen much. when you say i have seen alot of dsm's what is that maybe 100 to 200 in your life i have seen over 1500 in my years, i have seen shit that you couldnt even dream up dont doubt anything, the guy who invented the turbocharger made it for locomotives it progressed into wwII bombers then one day some guy whos name you should damn well know said hey lets put this on a damn car. everyone called him an idiot they said they wont work your a quack. so what happened. he did it. and it caught on like the plague. dont doubt anyone there are people who have done more in one day than you will do in your entire lifetime expand your horizions. wtf do you think people told shed when he said i want this car to run an 8 second quarter mile. they said yeah the same day a car goes 700 mph at bonneville flats. guess what you little shit he did it, and guess what else a car has destroyed 700 mph mark. you keep thinking people cant do anything. it just proves that your generation is fixated on nothing but yourself look back at what other people have done. be thankful for what they have accomplished yeah the old heads if it werent for them you little fucks would have these cars. or any of the technology that goes into them. with that said dont ever say something cant be done. there are millions of things you havent seen or never will see.

  14. #74
    Guest
    <div class='quotetop'>QUOTE(1166gvr4)</div><div class='quotemain'>i dont give a shit what you have seen go to dsm shootouts real dsm meets you will see some of the craziest shit you have ever seen like i bet you have never heard of bolting a turbo 350 tranny onto a 4g63t have you no,does that mean its never been done hell no because it has been done hundreds of times if you think a 9 inch rear wont go onto a dsm your a moron and you dont know shit. honestly i dont give two shits what you have seen obviously you have not seen much. when you say i have seen alot of dsm's what is that maybe 100 to 200 in your life i have seen over 1500 in my years, i have seen shit that you couldnt even dream up dont doubt anything, the guy who invented the turbocharger made it for locomotives it progressed into wwII bombers then one day some guy whos name you should damn well know said hey lets put this on a damn car. everyone called him an idiot they said they wont work your a quack. so what happened. he did it. and it caught on like the plague. dont doubt anyone there are people who have done more in one day than you will do in your entire lifetime expand your horizions. wtf do you think people told shed when he said i want this car to run an 8 second quarter mile. they said yeah the same day a car goes 700 mph at bonneville flats. guess what you little shit he did it, and guess what else a car has destroyed 700 mph mark. you keep thinking people cant do anything. it just proves that your generation is fixated on nothing but yourself look back at what other people have done. be thankful for what they have accomplished yeah the old heads if it werent for them you little fucks would have these cars. or any of the technology that goes into them. with that said dont ever say something cant be done. there are millions of things you havent seen or never will see.</div>
    ...and so how does this address your "whoopsy" of claiming a PT 74 when earlier you said GT30R? Oh yeah, it doesn't. You're just preaching to us trying to sound old and intelligent when in fact you are just looking like more and more of a retard every post. You lose.

  15. #75
    I didn't say anything about a 9 inch rear, you said 9-bolt rear! It's a shame you drive a nice car...
    <img>

  16. #76
    wow.. this idiot is mad at us because we read... maybe that's why we can actually write in a manner that is remotely understandable also? ...

    go read a book fool, no one believes your stupid lies. suddenly you have a second fuel rail, and your AWD car is back halved with a ford rear also?? hahahah ... hAHHAHA... HAH... some one please ban this fool, i'm sick of hearing his bull shit.

  17. #77
    1166gvr4
    Guest
    no respect believe what you want i dont care. i know what i had, i dont care what you think about it never will, if you think i care enough about a car and every spec of info about it that i wrecked almost two years go your an idiot i dont care about details. as i said anything can happen. i hope i cross paths with one or all of you man oh man are you going to have a bad time. i am going to be the adult that i am and walk away from this. its not worth my time. at all so go ahed and talk shit behind my back one day i will cross your path and i bet you wont run your mouth then. if you only knew what you were messing with.

  18. #78
    Guest
    <div class='quotetop'>QUOTE(sabzi5858)</div><div class='quotemain'>wow.. this idiot is mad at us because we read... maybe that's why we can actually write in a manner that is remotely understandable also? ...

    go read a book fool, no one believes your stupid lies. Â*suddenly you have a second fuel rail, and your AWD car is back halved with a ford rear also?? hahahah ... hAHHAHA... HAH... some one please ban this fool, i'm sick of hearing his bull shit.</div>
    Second fuel rail is entirely possible...but the rest of this douche's story is sickeningly funny.

  19. #79
    TGC Regular
    Join Date
    02-29-2004
    Location
    Orange County(irvine), CA
    Posts
    638
    <div class='quotetop'>QUOTE(1166gvr4)</div><div class='quotemain'> the guy who invented the turbocharger made it for locomotives it progressed into wwII bombers then one day some guy whos name you should damn well know said hey lets put this on a damn car. everyone called him an idiot they said they wont work your a quack. so what happened. he did it. and it caught on like the plague.</div>

    oh wow, u know, i think i read that exact same thing the other day somewhere online, dont know where, i think www.howstuffworks.com

    sorry, i dont want to get involved, just thought i'd share

  20. #80
    First of all, all true owners and lovers of their vehicles will know ever last minute detail, every spec, every measurment. They will know the type of steele used to make each part, heat tolerance, sheer levels, etc. From the look of your posts, it's a lot of cut and paste big words....sorry buddy. I hope we do meet one day...cause I'm scared.
    <img>

Page 4 of 7 FirstFirst 1234567 LastLast

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •