The Galant Center - Powered by vBulletin

Thread: v6 springs on a 4cyl

Showing results 1 to 11 of 11
  1. #1

    v6 springs on a 4cyl

    I remember reading this somewhere...and could not find it in the search...

    I was lookin on ebay for springs that drop the most for my 4 cyl....
    The lowest ones I found were the tien - Made for the V6
    2.2 front * 1.5 Rear
    They do make the m for the 4 cyl....
    1.7 Frong * 1.3 Rear


    Also was wondering if my factory shocks/struts will work for now....A couple month maybe...
    02- 55,000 miles

    any help would be great! 8)

  2. #2
    the reason you'll see generally the v6 drop lower than the i4 is because its much heavier than the i4. so if you were to put the v6 springs on the i4 (cuz u can) it'll still lower the car. just not as much listed on the box

    Webhosting for less than $3 a month? put "pinoyesv6" as a promo code.

  3. #3
    Quote Originally Posted by pinoyesv6
    the reason you'll see generally the v6 drop lower than the i4 is because its much heavier than the i4. so if you were to put the v6 springs on the i4 (cuz u can) it'll still lower the car. just not as much listed on the box
    hmmmm So has anyone used the v6 springs on a i4?
    I wonder which to get

  4. #4
    Quote Originally Posted by 02on19s
    hmmmm So has anyone used the v6 springs on a i4?
    I wonder which to get
    go back to the search tool.

    Webhosting for less than $3 a month? put "pinoyesv6" as a promo code.

  5. #5
    You are here entirely tooo much!! Serstylz2's Avatar
    Join Date
    09-10-2003
    Location
    Charlotte, NC
    Posts
    4,463
    i almost put Eibach v6's on bu they were cut and didnt fit.

    I coulda swore u were dropped already? Oh well

    if you're looking for an intense drop you might want to look into coilovers, they are adjustable for different drops...

    KYB AGXs also are adjustable so combining them with a good set of springs can give you the drop you want.. (Tein, Eibach, Tanabe etc)

    as far as the struts go, its all different cases, some people get springs and ride on their stock struts for miles n miles n miles, some people put their springs on and they blow asap

  6. #6
    Experienced TGC Member krispy03's Avatar
    Join Date
    08-23-2004
    Location
    Chaska, Minnesota
    Posts
    1,370
    im riding Eibach v6's on my 4

  7. #7
    Quote Originally Posted by krispy03
    im riding Eibach v6's on my 4
    x2

  8. #8
    You are here entirely tooo much!! Serstylz2's Avatar
    Join Date
    09-10-2003
    Location
    Charlotte, NC
    Posts
    4,463
    Quote Originally Posted by krispy03
    im riding Eibach v6's on my 4
    AGXs?

  9. #9
    TGC Regular
    Join Date
    02-29-2004
    Location
    Orange County(irvine), CA
    Posts
    638
    im riding on the Eibach Prokit for the V6, and i have a 4cyl.

    dont know if they have settled in all the way yet.

    and i have AGX's all around, set 4/3

  10. #10
    Experienced TGC Member krispy03's Avatar
    Join Date
    08-23-2004
    Location
    Chaska, Minnesota
    Posts
    1,370
    Quote Originally Posted by Serstylz2
    Quote Originally Posted by krispy03
    im riding Eibach v6's on my 4
    AGXs?
    no, springs

  11. #11
    You are here entirely tooo much!! Serstylz2's Avatar
    Join Date
    09-10-2003
    Location
    Charlotte, NC
    Posts
    4,463
    really.. thats a good drop for jus springs

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •