remove the socket
remove the boot
press on the locking mechanism in the middle. if you can push it in, push it in and down, and it should open. if not, go to the other side of the bulb and try it there
remove bulb
I went out to quickly changed my bulbs.. I thought it only take 5 minutes but it took me 15 min :x ...can't put back the safety pin and taking out the lites out of the wiring is hard..had to jerk off.... :evil:
may be can give me tips to make it easier changing the lites???
remove the socket
remove the boot
press on the locking mechanism in the middle. if you can push it in, push it in and down, and it should open. if not, go to the other side of the bulb and try it there
remove bulb
Webhosting for less than $3 a month? put "pinoyesv6" as a promo code.
its funny I thought the same thing when i installed my bulbs,
atleast you did it during the day. Like a fool I installed it at night with a flashlight that had a worn out battery. I thought it would take me a couple of minutes. actually it took me about an hour. But at the end I succeeded and felt proud. Now I have no problem installin headlight bulbs.............
Pearl White 2001 Mitsubishi Galant ES
Injen Race Division CAI System
Denso Iridium Spark Plugs
Magnecor Ignition Wires
Showoff Krypton Series Xenon Headlight Bulbs (H4)
Showoff Krypton Series Xenon Fog Light Bulbs (893)
Clear Corner Lights w/ PIAA Xtreme White Bulbs (1157)
Reverse Indiglo Gauges
Kenwood KDC-MP522 MP3/CD Receiver
Infinity Kappa 652.5i 6.75" Door Speakers
Kicker K693 6x9 Rear Speakers
Brembo Cross-Drilled/Slotted Disc Brakes
Axxis High Performance Brake Pads
<div class='quotetop'>QUOTE(nycgalant)</div><div class='quotemain'>its funny I thought the same thing when i installed my bulbs,
atleast you did it during the day. Like a fool I installed it at night with a flashlight that had a worn out battery. I thought it would take me a couple of minutes. actually it took me about an hour. Â*But at the end I succeeded and felt proud. Now I have no problem installin headlight bulbs............. Â*:D</div>
nup I actually did it during night with flaslite...i had no probl taking the lites out but puting it back is another story for me...anyway...my fingers hurts after pushing the safety pin....
Tanks to this thread I just did a 5-10 min install of new hyper whites. Thanks guys!
gettin them out is no problem like you said but i had a lil trouble puttin the first one in but once i figured that out i but the other light on in no time
My problems were that I couldn't unplug the dang bulbs...after that it was smooth sailing.
"Daisy tumbled short of his dreams, not through her own fault, but because of the colossal vitality of his illusion... No amount of fire or freshness can challenge what a man will store up in his ghostly heart. " - F. Scott Fitzgerald, The Great Gatsby
"I have not failed 700 times. I have not failed once. I have succeeded in proving that those 700 ways will not work. When I have eliminated the ways that will not work, I will find the way that will work." - Thomas Edison
can u tell me; did u just pull itu out? i'm afraid it would break the bulbs? or not?Originally Posted by Rallifan
thnx
Yeah basically I said screw it and yanked and yanked until it came free...don't think there's any real damage though.
"Daisy tumbled short of his dreams, not through her own fault, but because of the colossal vitality of his illusion... No amount of fire or freshness can challenge what a man will store up in his ghostly heart. " - F. Scott Fitzgerald, The Great Gatsby
"I have not failed 700 times. I have not failed once. I have succeeded in proving that those 700 ways will not work. When I have eliminated the ways that will not work, I will find the way that will work." - Thomas Edison
hold the socket for the harness by the sides and pull. if you feel like you are gonna break something. if you know where the lil retailer clip is for the bulb, hold onto that and while u pull on the socket
Webhosting for less than $3 a month? put "pinoyesv6" as a promo code.
I had the same problem getting the damn bulbs out of the socket I had to do some basic manuvering and then I was good to go.
yeah i had to get used to that h4 set up. but its not bad though we have the room atleast. my other car 97 civic was a bitch. h4s too. i had to move the power steering hose and go between a 4 inch space without letting the bulb touch anything (drvr side). don't want to blow my new kryptons. it was like that old game operation
2001 I4 White ES
Injen intake
Arospeed bomb
Magnecore wires
Denso iridiums
Gdi stb
Alpine cd
polk components
2 alpine 10s
2003 17inch eclipse gt rims
Yokohama tires
Bookmarks