The Galant Center - Powered by vBulletin

Thread: Cross Drilled/Slotted Rotors

Showing results 1 to 8 of 8
  1. #1

    Cross Drilled/Slotted Rotors

    Hey everyone. I just found out I gotta replace my rotors soon and I wanna get some nice Cross Drilled/Slotted ones. Which ones will be best for everyday driving and have a good price. I'm not lookin to spend more than 4-500 bucks. I would like to spend less than that if possible. Lemme know what you guyz recommend. BTW I got an 2001 ES V6.

  2. #2
    Senior Moderator DOHCstunr's Avatar
    Join Date
    12-17-2004
    Location
    Louisville, KY
    Posts
    4,328
    https://www.thegalantcenter.org/viewt...s+irotors+axxis

    irotors are great. if you order from them(which you should),
    tell them john turnmire sent you.

    you will like them. i used the ceramic pads but metal master are good too if you want to save cash. both have great bite.

    be sure to flush your old dirty spongy brake fluid out with some fresh DOT 4 fluid when you change your rotors. wouldn't want to ruin a perfectly good set now would you?

    and use moly brake lube for your slide and guide pins.
    ______________________________

    1994 Galant GS-Turbo

  3. #3
    TGC Regular shortdogg2k05's Avatar
    Join Date
    11-10-2004
    Location
    H-town, TX (the bayou city)
    Posts
    556
    r1concepts on ebay is where I got my slotted and cross-drilled rotors from. $80 for a set of 2 I think, then I just bought some wagner brake pads from the o'reilly. No problems and they have been on for about 5 months now.


    Back from the dead!!!

  4. #4
    Get the power slot big brake kit.
    Love,
    Matt

  5. #5
    JCell
    Guest
    How hard would it be to flush the brake fluid?

  6. #6
    Senior Moderator DOHCstunr's Avatar
    Join Date
    12-17-2004
    Location
    Louisville, KY
    Posts
    4,328
    Quote Originally Posted by JCell
    How hard would it be to flush the brake fluid?
    not hard at all
    ______________________________

    1994 Galant GS-Turbo

  7. #7
    JCell
    Guest
    is there a how-to?

  8. #8
    Experienced TGC Member Dominicano's Avatar
    Join Date
    07-31-2002
    Location
    Fort Worth, TX
    Posts
    1,418
    if you got a v6 they got a special for 375 shipped for powerslot and hawk pads from PPS. Check out the club3g.com site

    http://www.club3g.com/forum/showthread.php?t=25719.

    You will not find these rotors and pads cheaper anywhere. believe I looked.



Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •