trying to re-wire JDM to USDM tails

[furiousgtz]

ok first of all, i got 6 total harness from the new jdm tails and the stock ones i got has 4 slots.. i dont need to use all fours slots or holes? since i only received 6 total harness :? and what about the bulbs
JDM
STOCK.

[Dominicano]

ok first of all, i got 6 total harness from the new jdm tails and the stock ones i got has 4 slots.. i dont need to use all fours slots or holes? since i only received 6 total harness :? and what about the bulbs
JDM
STOCK.

one of you stock udsm sockets fit into the jdm tails you can use that one and then the others. If you do not want to use the 4th bulb its up to you.

[ChikagoGTZ]

I did a quick job when I initially wired them up but on the weekend I'm taking it out and soldering all the connections. I basically built a totally new harness with the 3 supplied sockets and 1 existing USDM socket....and then wired those into the USDM harness connector. I'll post pics for you then.

[furiousgtz]

I did a quick job when I initially wired them up but on the weekend I'm taking it out and soldering all the connections. I basically built a totally new harness with the 3 supplied sockets and 1 existing USDM socket....and then wired those into the USDM harness connector. I'll post pics for you then.

ok so the 1 existing USDM socket i dont have to touch and rewire other 3. ya i to get new bulbs it Did'nt came with any bulbs.

[ChikagoGTZ]

I did a quick job when I initially wired them up but on the weekend I'm taking it out and soldering all the connections. I basically built a totally new harness with the 3 supplied sockets and 1 existing USDM socket....and then wired those into the USDM harness connector. I'll post pics for you then.

ok so the 1 existing USDM socket i dont have to touch and rewire other 3. ya i to get new bulbs it Did'nt came with any bulbs.

No, you still have to cut the 1 USDM harness (reverse) to be your new blinker.

Dave

[pinoyesv6]

thats not stock. thats the back of a them aftermarket tyc altezza style lights.

if you don't have the factory tail light harness, you can get a new socket at the auto parts store. they run about 4-6 bucks depending on which ones you get.

[furiousgtz]

thats not stock. thats the back of a them aftermarket tyc altezza style lights.

if you don't have the factory tail light harness, you can get a new socket at the auto parts store. they run about 4-6 bucks depending on which ones you get.

ya thats altezza the factory one is on my car..i will take it out and get those harness thaxx man i thought they all run the same :x

[furiousgtz]

i cant find new blubs for my JDM shockets... any idea?

[pinoyesv6]

did you check the auto parts store? im sure they have them there.

[furiousgtz]

no i went to autozone and advance auto parts..they dont have em.

[pinoyesv6]

what were u looking for? i am pretty sure they have them

[ChikagoGTZ]

<div class='quotetop'>QUOTE(furiousgtz)</div><div class='quotemain'>no i went to autozone and advance auto parts..they dont have em.</div>

7443 x 4 and 7440 x2

Good luck

[furiousgtz]

<div class='quotetop'>QUOTE(ChikagoGTZ)</div><div class='quotemain'><div class='quotetop'>QUOTE(furiousgtz)</div><div class='quotemain'>no i went to autozone and advance auto parts..they dont have em.</div>

7443 x 4 and 7440 x2

Good luck</div>

oh nice..that should help.. i will go to pepboys. 7440 (reverse) and 7443 (stop) rite..well i figure it out when i get it..

[bronxbombr]

I know i saw a TUT on this somewhere, but i think you can ask GalantKev. He has those tails too.