18X8.5 18mm offset

[remarque]

Hi, I found a set of konig imagine wheels, but the width is really wide 8.5. I read some on tgc that some people are 8" and wider, but the offset of these wheels are really low. I used the offset calculator at 1010tires and it said that I will have 4mm less in the inside and extend an extra 60mm on the outside. Now question is can I use spacers to correct the offset?

Note: the calculator is specified toward any cars. http://www.1010tires.com/WheelOffsetCalculator.asp

[RedGalant2k1]

With or without spacers they won't fit. Though Konig did make those with proper offset for our cars.

[bergundy2k1]

Wont fit, no way they will be rubbing on the springs on the inside I think or they will be waaay past the fender.

[Reelax]

spacers will actually make them fit even less.

[ChikagoGTZ]

Ya, you'll need a massive widebody to get these to look right....unless your going for the beaner look with wheels that stick out 3 feet from the sides...8.5 will fit in a 43 offset and not rub from all I've seen

[remarque]

I knew they were going to stick out far, but I guess I was blinded by amazing deal. Thanks for the help.