Log in
Register
Reply With Quotewelcome to the site man.... for the tails, if they come with the harness, then you should be able to plug and play. if not, you will have to modify your harness.
I just bought a 2003 Galant ES 4cyl.
Some pics..
I was wondering what modification is needed to install these tail lights...
http://cgi.ebay.com/ebaymotors/GALANT-VR-4...1QQcmdZViewItem
I also want some ideas on how to begin modding my Galant..? Any ideas?
Thanx
welcome to the site man.... for the tails, if they come with the harness, then you should be able to plug and play. if not, you will have to modify your harness.
n3oAcid24 = 01' Galant I4
Welcome to TGC.
If you think those look good, check out the 2nd gen JDM tail's. Welcome.
nice G. Welcome to TGC.
welcome
ya there is a section in How To... Tutorials
Your starting in the right track
Welcome to TGC!
Welcome 8)
VELKOM!!!! good luck with your new obsession!!
welcome, if it DOES come with the harness you will ahve to cut you plug of and wire it by color except i think that there are 2 green conected to 1 green wire and 2 green with white stripe conecting to the 1 green with white stripe, if i remember correctlly, if it DOESNT come with the harness you will need to mod yours and add a new bulb to the harness which is found to do so in the tutorial secton cosmetically they just bolt right up
edit
welcome yo! good find!
"If you ain't first, you're last."
WE THE BEST!!!
Keep looking on ebay for gen 1, 2, or 3 with the harnesses, its much easier, but it may cost a bit more
Posting Rules
Bookmarks