found this when i came home today... :) Mishimoto evo radiator with 2 slim fans.
found this when i came home today... :) Mishimoto evo radiator with 2 slim fans.
Fully Built 4G63
HKS 272
ported Dual Ball Bearing FP RED 84mm 25psi w/ external dump
Sexy!!!
Currently on my 3rd 8G... Not giving up this time!
well today im a happy camper...after waiting for 6 weeks she finally arrived....
first.
Aeromotive 340LPH fuel pump.
Derale oil cooler w/ fan, using it for the engine oil.
and finally the LUNGS have arrived.
FP RED 84mm Dual Ball Bearing Ported Turbo with 25 PSI Actuator, and a Muse External O2 Dump.
first thoughts that came to mind...holy sh*t this thing is huge compared to the stock evo 9 housing. this 84mm housing is huge...for those of you that dont know what an FP red can do just go on youtube and search for EVO FP Red.
countdown 1 week until the swap begins.. i will be posting from time to time as things progress.
Fully Built 4G63
HKS 272
ported Dual Ball Bearing FP RED 84mm 25psi w/ external dump
Looks very promising, looking forward to updates!
-Greg
"I smashed up the grey one, bought me a red;
Every time we hit the parking lot we turn heads!"
-Pimp C, "International Players Anthem"
niiice stuff man! Any idea when you're going to get it all together?
Lancer/EvolutionX Rotor Glow Paint
6g74 Forged Engine w/ hx40 turbo
Eclipse GT 5 spd swapped
Rotor Glow Galant
Daily Galant
OZ Edition Eclipse
im on vacation next week...so for sure the engine is going in..as far as when shes gonna turn on...dont know yet...still have to gather mics fittings and stuff. mainly all you see will be installed except for the new turbo, thanks to stewi i almost made a mistake of installing this turbo during break in period and risk metal particles getting in the new turbo. a lot will be done next, its just a matter of time now.
Fully Built 4G63
HKS 272
ported Dual Ball Bearing FP RED 84mm 25psi w/ external dump
well i started taking it all apart... only worked on it for 4 hours, got all the plugs labeled and removed. will work on it all day tomorrow and try to have it out, waiting on a few fittings to arrive before i drop the motor in. meanwhile ill go get the motor mounts pressed out to install the prothane mounts, plus replace the complete steering system with new control arms, tie rods, bushings ect.. didnt have much time for pics today, so ill post what i have, more to come as the week goes on.
stock evo 9 turbo compared to the FP Red.
Fully Built 4G63
HKS 272
ported Dual Ball Bearing FP RED 84mm 25psi w/ external dump
Damn! Looking good man! Keep it up. Im jealous of your work! lol
Currently on my 3rd 8G... Not giving up this time!
Awesome man, you didn't cheap out on anything so this is going to be good, now send me that 9 turbo/manifold over here ;)
4g64T 5spd
Well got the whole steering suspension done.
Missing from the picture front links, new axels
This is what a dead inner tie rod looks like. All limp no action.
This is what a new inner tie rod looks like. Nice and firm ready for action.
Both sides done
So how about a galant tri-turbo, an evo 8 turbo,evo 9 turbo, and the FP Red. Ha.. Im collecting to many turbos, might give one to goodwill for donation.
Last edited by whokilledhoughes; 11-07-2011 at 04:07 PM
Fully Built 4G63
HKS 272
ported Dual Ball Bearing FP RED 84mm 25psi w/ external dump
That last pic is awesome, I know you are taking it easy, whats your personal deadline to finish this?
4g64T 5spd
Im good, will you donate?
Lulz, my last post was cheesy.
Bookmarks