The Galant Center - Powered by vBulletin

Thread: No juice to the gauge cluster

Showing results 1 to 3 of 3
  1. #1

    No juice to the gauge cluster

    I am not receiving any power from the wires that attach to the ballast wires of the reverse el gauges. I checked the ballast and the gauges and they are fine. I noticed that the small bulbs on the back of the cluster are not lighting as well. Is there a fuse for this wiring, and if so what is the fuse listed under, 'cause I checked them all? If it is not a fuse related problem, does anyone else have any solutions? Thanks.

  2. #2
    make sure the two connection on the back of the cluster are plugged in. but before that, make sure that the dimemr switch is plugged in too

    Webhosting for less than $3 a month? put "pinoyesv6" as a promo code.

  3. #3
    karlkaniguy
    Guest
    check your passenger side tail light and your driver side fog light as well.
    right now i am having the same prob as you except those other things are out to. I did have the same thing happen before and it was just a fuse under the hood if i remember correctly it was a 10amp labled with a little guage and needle. just hope you are not having the same prob as me i have checked every fuse and connection in my car.

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •