well just get a socket 10mm put it on a wrench with the extension
does anybody know an easy was to remove the oil pan from a 7g? i got all the bolts off except one that is impossible to get to because its right up against the transmission, does anyone know a trick to getting hard to reach bolts out? any help would be greatly appreciated. thanks
well just get a socket 10mm put it on a wrench with the extension
I know the bolt your talking about. Its the second one on the rear of the engine by the trasmission. The axle is in the way. You have to use a 10mm open end wrench from the top of the axle.
ASE Certified Master Automotive Tech
2000 Galant ES = Daily Driver
1996 Galant Turbo + 5 speed & lsd = fun ****SOLD****
1992 Galant VR-4 #372/1000 Kensington Grey ***SOLD***
a socket even with an extension wont fit because theres this rubber boot right next to it so that prevents any kind of socket to get in there. but ill try the open end wrench later. bear in mind im doin this in my driveway on jackstands so its kinda hard to fit under there. thanks for the help though
"driving a honda is like being in the special olympics, even if u win ur still retarted"
Bookmarks