It's started...

[00GalantMan]

I go out to my car this morning to go to work and notice my clear coat is peeling...



This sucks...Any ideas on how to stop it from spreading before I can get it painted?

[Kenneth G]

put some lotion on it, lol

can you respray clear without taking off the whole coat?

[Gly]

rub it back with some fine wet & dry sand paper,
then respray it with a can of clear coat,

then rub the new clear coat back with very fine wet + dry
then buff + polish,

it can be done quite easily and come out very well if you just take you time.

[00GalantMan]

rub it back with some fine wet & dry sand paper,
then respray it with a can of clear coat,

what grit sand paper? I have some 400 around here somewhere that I used for painting my interior. Is that good enough?

[lonestar22]

may be a little too rough

[evil-G-nius]

you could just tell it to stop! :?

might work! You dont know! LOL

[Stewi]

You should be rubbing it back with 800-1000 and then once you recoat it and wetsand with 1500.

[Gly]

yeh start with 800,
work your way up to 1200,

then clear coat, then rub 1200, upto 1500,

add polish then light hand buff