Yepp you can use the same striping as Toyota Honda or any other suv with flares....
wanted to know besides those who got the weatherstripping for the JDM flares from Toru, did anyone use something else instead?
Yepp you can use the same striping as Toyota Honda or any other suv with flares....
thanks for the help! so I would have to get 4 of those to cover all four right.
Last edited by Dominicano; 07-03-2012 at 02:48 PM
Slight roll not much needed for a 35 offset depending on tire size. I'm running a 30 offset on a 225/40/18 and 0 camber only needed to roll half the lip wit a couple of mm of clearance it's very close thou
That's actually not bad I don't remember who but someone else paid 3 times that for that crap.
I don't recommend cutting and for good reasons it weakens your panel after u cut it it has to be welded because the lip is the bond between the panel n the well then painted so it don't rust you'll regret cutting, just roll it it's a better n smarter method. I cut my jettas lips my quarters warped from the welding i had to do body work and repaint half the car worst thing I ever did!!!!
Bookmarks