how i hate them...when i first got the car the negative terminal was corroded so bad i couldnt get the bolt off cleaned it up and replaced the bolt hasn't corroded since,but now my positive has completely corroded,how would I go about replacing it?
Go to Autozone, Pepboys, or even Wal-mart. Just buy the replacement battery terminals. You will spend about $3.00 for a new positive and negative terminal. The nice ones will be paint coated for corrosion resistance.
I can post pics of the terminals I installed on my 7g later on if you want.
1991 Galant VR4 1948/2000_________1996 Galant "S" 5 speed 2.4L turbo
did you solder the clamps onto the wires, or just clamp them down? i'm about to get some new ones.
2003 ES 2.4L - 150k - Stock
tranny flush, timing belt, tensioner replacement at 80k
Use coke to eat away the battery acid :D :D
no shit...i forgot about that....Originally Posted by pvu_rida
You can also spray "disc brake quiet" on the terminals to prevent corrosion.
if i were to buy one of those new clamps would i still have the fuse or would I have run a new one
He can also use the silicone that they have to help pervent corrosion too.
Hate to bring back an old thread, but how do you go about changing the positive termianal? I have the Infinity sound in my 8g and the are about 3 wires and a fuse on my positive terminal, how do you go about installing a new one?
You could order a replacement terminal from mitsu. It's a 2 piece terminal. One piece is the ring that goes around the terminal. The other piece is the fusible link. The power lines can be unscrewed from the fusible link
Posting Rules
Log in
Register
Reply With Quote
2002 Mitsubishi Galant GTZ
Bookmarks