First things first, start the car with the key. Activate the remote start, now turn the key off and remove it. Does the car stay running? If not, then you don't have the ignition wiring correct. Double check your connections.
If it does stay running, then the ignition wiring is correct. Now alot of rookie installers and diy'ers make the mistake of hooking up all of the wires for the 556uw. In the case of the galant you'll only need 3 of the 6 wires from the 556uw. These are
Red - Goes to constant +12volts
Black - Goes to ground
Blue - This one can be tied into either the blue/white wire on the 5pin harness that plugs into the brain, or the blue wire on the 4 pin harness that plugs into the relay pack.
The pink, green, and violet wires from the 556uw harness will not be used tape them up or pull them out of the harness.
Bookmarks