More from PLX, thanks for the guidance Stewi!

**mtcavity1** · 01-09-2008, 12:55 PM

I again can’t mention enough on Stewi sending me to PLX devices for there gauges. :smt023

I picked up the new DM-100 Digital/Programmable display module and controller. Also got the AIT and EGT sensor modules and will be using the DM-100 to view them both (can view up to 4 sensor modules at a time).

The greatest part about PLX’s advanced technology is the price, which is absolutely outstanding. The DM-100 is $210, while the sensor modules SM-EGT and SM-AIT both run for $125, including sensors (they are $30-40 cheaper if you have the sensors already).

They all have analog outputs so you can completely replace factory units if you choose.

I still plan on getting the Boost/Vacuum, Oil Pressure (w/2 inputs), Fluid Temperature (w/2 inputs), and OBD-II monitor. I should have them all by the end of the month. :D

Oh yea, and got an Aeromotive FPR installed! Much easer to tune in boost...

http://www.plxdevices.com/

Check PLX out if you guys got some time…

DM-100

SM-AIT

SM-EGT