PROBLEM AGAIN........

[JEFFRYKIBE]

Anyone who did the shifter cable upgrade to the skateboard bearing have any probs with gear engagement afterwards cuz i did it and couldnt get 2nd gear. Put the factory ones back in and everything is fine again

[DOHCstunr]

i never had any problems.


do you have any after market motor mount inserts?

do you already have the steel shifter base bushings in?



are your shift cables well lubricated?

are your clutch lines fully bled out?

is yoru clutch pedal adjusted properly?

[Sleepervr-4]

Never had any problems as well. Check the things DOHCstunr mentioned.

[GOOSEY2099]

whats a skateboard?

[Sleepervr-4]

whats a skateboard?

A skateboard is a four wheeled platform used for the activity of skateboarding. It is propelled by pushing with one foot while the other remains on the board, or by pumping in structures such as a half-pipe or bowl. A skateboard can also be used by simply standing on the deck while on a downward slope and allowing gravity to propel the board and rider. That being said, the skateboard is not easily defined. Unlike most other sports, there is no governing body which declares any regulations on what constitutes a skateboard or the parts from which it is assembled. For example, longboards are a type of skateboard with a longer wheelbase, and are typically composed of larger and softer wheels. Thus, the definition of a skateboard can vary in both appearance and performance as well as size.

[GOOSEY2099]

Fuckin Slackers!!

[Sleepervr-4]

Fuckin Slackers!!

Eh it's the American way :D

[laxinwarrior]

Damn new yorkers ... I've had the bearings installed for over a year with absolutely no problems. When you pressed them in, did you make sure they were completely even? If they were pressed in on an angle it would cause the cables to bind when you shifted.

[IVORY_G]

whats a skateboard?

A skateboard is a four wheeled platform used for the activity of skateboarding. It is propelled by pushing with one foot while the other remains on the board, or by pumping in structures such as a half-pipe or bowl. A skateboard can also be used by simply standing on the deck while on a downward slope and allowing gravity to propel the board and rider. That being said, the skateboard is not easily defined. Unlike most other sports, there is no governing body which declares any regulations on what constitutes a skateboard or the parts from which it is assembled. For example, longboards are a type of skateboard with a longer wheelbase, and are typically composed of larger and softer wheels. Thus, the definition of a skateboard can vary in both appearance and performance as well as size.

WTF! Is that str8 4m Webster? Webster's Dictionary?

[GOOSEY2099]

Fuckin Slackers!!

Eh it's the American way :D

"In Mother Russia we didn't use bearing, the bearing used us!"

[kolio]

no problem with mine. do what laxin said check to see if they are pressed in properly

[evil-G-nius]

Mine are a little iffy...not a very smooth transition between gears all the time...BUT it does go into gear with out any problems. Its just not butter smooth thats all

[lonestar22]

Mine are a little iffy...not a very smooth transition between gears all the time...BUT it does go into gear with out any problems. Its just not butter smooth thats all

butter smooth ey?
maybe u need an automatic?
lol jk

[seth98esT]

Mine are fine. Shifts arent always smooth on a cold trans, but once everything is warmed up, she shifts like a dream!

[JEFFRYKIBE]

Everything was installed correctly they pressed in nice and straight lube both cables and i just did a master after my clutch incident lol. Upon further inspection after i took my trans out 2nd gear synchro was broke in two waitin for rebuild to be done. oh yeah my trans only worked for the day when i said everything was ok again