probably what you wanna do is run the red and clack wires along your hood inside the hood til you get to the end by the ninges. then into the car to a toggle switch . Just be sure you have a constand hot and good ground. it's pretty easy. you need to wire the ground(black) to any ground wire. then run the Hot(red) to a toggle switch(remote) then run a constant/power source to the other prong on the toggle switch. then flip the switch to ensure the wiring is good. to test it out. just connect the red to the positive on the battery and the black to the negative before you put them on the car.
Bookmarks