The Galant Center - Powered by vBulletin

Thread: 94-97 Integra Type R Front Half Bumper Project (w/pics)

Page 1 of 3 123 LastLast
Showing results 1 to 20 of 45
  1. #1

    94-97 Integra Type R Front Half Bumper Project (w/pics)

    Discrection from the OP: please DO NOT ask or send me pm's where and how did I obtain the lip. This is a rare jdm half bumper only avaliable from request from your local import shop. It's not that hard to search on the inter-web

    So I have this problem of getting my front to flush with the rest of the car. The super VR4 sides proved too low for my already unique Mugen lip and sadly I had to find another suitable front end. Many advised me to go jdm front but that's just blending in with the masses. So I went to my local import shop and picked up...

    1994-1997 Integra Mugen Front "half bumper" (ABS)



    Lo and behold, it fits



    It matches with the sides

    I'll start trimming the areas around the fog light, the fitting proccess will be the same as the mugen integra lip install for those wanna know. I'll keep you update on the progress during the week.
    Last edited by G-spot; 02-18-2008 at 05:09 PM

  2. #2
    You are here entirely tooo much!! 99 galant's Avatar
    Join Date
    07-19-2007
    Location
    Connecticut
    Posts
    3,994
    looks like its going to look good :D

  3. #3
    TGC Regular phizzalot's Avatar
    Join Date
    04-25-2007
    Location
    Orlando/Ft. Luderdale ex {phizz2k}
    Posts
    727
    Dam thats a nice look... Dosen't seem like very much modification will be needed as well... Good luck
    ---||| 97Galant, E3 16G, Safc, 5spd,Drifter Body |||---

  4. #4
    Senior TGC Member underated's Avatar
    Join Date
    08-08-2004
    Location
    Las Vegas
    Posts
    2,099
    i hate to break it to you but thats not a type r lip its mugen lip... type R doesnt have any holes
    Brandon - 2001 Galant GST 5speed
    Wiseco // Eagle // PTE // Holset // Turbonetics // Supertech // Blox // Prosport // Vibrant // Innovate // OpenEcu // Mishimoto // Magnaflow // Walbro // XXR // Rotora // Brembo // Hawk // R1 Concepts // Dc Sports


  5. #5
    You are here entirely tooo much!! fatal1's Avatar
    Join Date
    04-10-2005
    Location
    NYC
    Posts
    3,695
    hmm interested to see how it turns out

  6. #6
    my bad, didn't read the label correctly. it is mugen half bumper lol

  7. #7
    nice ,very nice


    JDM front covension Old style vr4,18"axis black seven mod,clifford alarm,egr rear window visor,kenwood unit 7"screen DVD,two tones paint job,3G strut bar , HID's.

  8. #8
    Senior TGC Member underated's Avatar
    Join Date
    08-08-2004
    Location
    Las Vegas
    Posts
    2,099
    Quote Originally Posted by G-spot View Post
    my bad, didn't read the label correctly. it is mugen half bumper lol
    it should look good after you fit it to the bumper i like how it sits even with the side skirts
    Brandon - 2001 Galant GST 5speed
    Wiseco // Eagle // PTE // Holset // Turbonetics // Supertech // Blox // Prosport // Vibrant // Innovate // OpenEcu // Mishimoto // Magnaflow // Walbro // XXR // Rotora // Brembo // Hawk // R1 Concepts // Dc Sports


  9. #9
    looks good, deff a 1st
    00 Galant ES Turbo/5-Speed
    13 GTR

  10. #10
    Experienced TGC Member SleekGTZ's Avatar
    Join Date
    05-09-2005
    Location
    Washington state
    Posts
    1,065
    I think that will look good once its finished.
    Props for being first and unique.

  11. #11
    *cough*should put it on the wiki*cough*

    man that was a really big cough..

  12. #12
    Trim the fog area (looks like a super vr4 lol...)

    I'll wiki this when it's finished

  13. #13
    looks very nice! cant wait to see it painted.

  14. #14
    wow hell yea g-spot that looks sick! after paint you are gonna turn some heads for sure.
    The "Tumbler" Is Here
    Stock Longblock/Stock PCM | Custom Garrett 50-1 | 17 Psi | Weighing 2xxxLbs
    3xxWHP/3xxWTQ [Current]

  15. #15
    TGC Regular
    Join Date
    08-01-2002
    Location
    S. CAROLINA/GEORGIA
    Posts
    758
    Looks like a very good project. If I didn't already have a front, I'd try that too. And he's right about how easy it is to find one of these half bumpers.

  16. #16
    You are here entirely tooo much!!
    Join Date
    07-31-2002
    Location
    Bronx NYC (reppin)
    Posts
    3,489
    HoTT!!

    Not how fast your car goes but how good u drive going fast.
    Drive It Like You Stole It!
    7G Erubini Body Kit for sale
    http://thegalantcenter.net/forum/viewtopic.php?t=57678

  17. #17
    You are here entirely tooo much!! 99 galant's Avatar
    Join Date
    07-19-2007
    Location
    Connecticut
    Posts
    3,994
    looks good with the cut out you did

    its funny how many people told you to cut it...

  18. #18
    Experienced TGC Member Kalamidad's Avatar
    Join Date
    11-24-2002
    Location
    Originally TGCNY, Now TGCTX
    Posts
    1,781
    the rear seems too high now peter?
    -Pedro

  19. #19
    Experienced TGC Member njjfudge's Avatar
    Join Date
    02-28-2005
    Location
    Jonesboro, GA
    Posts
    1,447
    I like I really like. Good work G-Spot.

    2001 w/Old Style VR-4 front conversion

  20. #20
    Quote Originally Posted by Kalamidad View Post
    the rear seems too high now peter?
    there's no way pleasing you is it?:smt028

Page 1 of 3 123 LastLast

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •