The Galant Center - Powered by vBulletin

Thread: How do i clean injectors?

Showing results 1 to 14 of 14
  1. #1
    TGC Regular
    Join Date
    08-24-2002
    Location
    Wisconsin, Can You Say Cheese?!
    Posts
    950

    How do i clean injectors?

    how do i clean out the injectors in my 92 Galant? i was told they need cleaning but dont wanna pay to have it done. im not very knowledgeable in mechanics so help would be greatly appreciated. thanks

  2. #2
    without the proper equipment, you cant.
    and the "injector cleaning" crap that people add to their gas tanks is just that.... crap. it does nothing of value.

  3. #3
    TGC Regular
    Join Date
    08-24-2002
    Location
    Wisconsin, Can You Say Cheese?!
    Posts
    950
    my dad owns a repair shop so i have the equipment. i just dont wanna pay one of the mechanics to do it.

  4. #4
    if you dont know how to do it, you should NOT be doing it.
    its dangerous as all-get-out, and even if you manage not to start the place on fire, the professional cleaning liquid WILL take the paint off of cars if you spill even a drop.


    seriously, pay someone to do it (or watch someone doing it).
    it is not for someone who is green with the way of the cars.


    also, why in the world do you want it done anyway? if there is a drivability issue, chances are it will not fix it.

  5. #5
    TGC Regular
    Join Date
    08-24-2002
    Location
    Wisconsin, Can You Say Cheese?!
    Posts
    950
    well ok. here is my prob maybe u can help.

    first of all they do need cleaning. one mechanic sprayed something in to test something and huge black smoke came out of the exhaust. so he thinks they need cleaning.

    heres what happends when i drive. alot of times i start it and it stall once i go to push the gas. even when its just a little cold. it runs VERY rough when cold. i started it once and started driving and the whole front of the car was shaking. visibly shaking. id floor it and barely accelerate even after getting above 20. and sometimes i push the gas and it doesnt kick in right away. of i push and u can feel the engine slow a bunch and then kicks in. my check engine light is on and im gonna have it scanned. but what could be the problem. its so annoying.

    my belts squeak too. but i was told this is cause oil is leaking on them. i have a bad oil leak.

  6. #6
    i doubt very much it has anything to do with the injectors.

    it sounds a LOT more like a failing coolant temp sensor, a failing throttle position sensor, or a MAF sensor.

    get it scanned before you replace ANYTHING.

  7. #7
    TGC Regular
    Join Date
    08-24-2002
    Location
    Wisconsin, Can You Say Cheese?!
    Posts
    950
    ok. will do.

  8. #8
    JF
    Guest
    you may also want to check your fuel filter........

  9. #9
    ken inn
    Guest
    check and see if the get-rid-of-car lite is on.

  10. #10
    TGC Regular
    Join Date
    08-24-2002
    Location
    Wisconsin, Can You Say Cheese?!
    Posts
    950
    <div class='quotetop'>QUOTE(ken inn)</div><div class='quotemain'>check and see if the get-rid-of-car lite is on.</div>

    lol

  11. #11
    thunderboy
    Guest
    try using the mitsubishi fuel system cleaner

  12. #12
    galantgal05
    Guest
    i feel ur pain, Proud Galant Driver. i also have a 92 galant with the same problems. except it doesnt have to be cold. it acts like its not gettin enuf gas. so i got new fuel and air filters. well i changed the air filter today but the battery has an alarm on it so when i try to reconnect the negative cable the damn alarm goes off. do u have one of those on ur car? if so, u kno how to make it stop?
    thanx 4 ur help

  13. #13
    ConceptSleeper
    Guest
    there is a topic for the disconection of the battery alarm in this forum, just search for it!!!

  14. #14
    Brianguy
    Guest
    batt alarm?! is this standard for that year?

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •