New GTZ grille

[4g63lover]

Contemplating on cutting the "fins" off.

I like the look it gives though, kinda classy.

What you guys think should I do the VR-4 grille mod by cutting the vertical bars or just keep it the way it is?











Got the grille from lucap100is great seller!

[beam514]

I absolutely hate the fins. it makes the galant look like a grandma car to me. I say either cut the fins or paint them black so they aren't as noticeable

[dknight3]

yea i dont like them either i would cut them, and if you mess up i have another silver one you can buy.

[RAZ_76]

It will look much cleaner without them bars. Cut them! Thats the second thing I did.

[gtx]

It's just as classy as the fake wood trim lol. Actually since it's color matched it's already better. But when I cut mine I liked it a lot better that way.

[knesmomax1]

cut the bars add some mesh!

[4-G-rim]

Jigz....didn't you used to have a modified "VR4" grille?

Ditch the stock USDM fin grille...its gives the Galant a mundane look.

[SleekGTZ]

I absolutely hate the fins. it makes the galant look like a grandma car to me. I say either cut the fins or paint them black so they aren't as noticeable

Yep, those vertical fins really make it look like a grandma car (in my opinion). That's why it was my very first priority to get rid of it from my g when I first bought it. I also had the chrome grill, then I painted it black first. Then I thought about cutting those vertical fins with a dremel tool and putting mesh in them............but then I discovered TGC and this whole thing about JDM and the rest was history. :)

If JDM is not your taste, then at least you can cut them out and push mesh in it. That would be much better than your stock grill.

[glantv699]

If you really want to keep the fins, definitely paint them black.

[4g63lover]

Jigz....didn't you used to have a modified "VR4" grille?

Ditch the stock USDM fin grille...its gives the Galant a mundane look.

someone tapped my car in the parking ot at work and cracked the grille.

yeah, i'm just going to cut the fins off and put mesh in it.

I have no intention of going JDM in the near future...

Next on my list, is mugen lip, and m3 lip spoiler, after that, its 5-speed time =D

[Flutterbyfilms]

cut the bars and adds some mesh. I was half way through doing this when I decided to get my kit, so I didn't finish it. But it's a pretty easy project if you have a dremel.

[mrjaydeeone]

yeah definitely cut them out and mesh the grille

[4g63lover]

So I cut the fins.. spent about five hours...

hmmm.... I like the look.

But I have to do something about where the "fins" used to be






fucking hood needs to be replaced...

[9G]

much better/

[dknight3]

yea look real good man.

[4g63lover]

day pics yO!

I'm going to paint the protion of the grille I cut the fins off from when it gets warmer out.

the car needs to be cleaned. It's obvious that the car if filthy through the pics...












Tell me what you guys think?

[99 galant]

looks good, i think you should do the bottom too where your plate is

[4-G-rim]

Much better Jigz!

[RAZ_76]

Looks really good! Good job. I'll tell you a secret on how to keep from seeing everything behind the grill and not block any air coming in. Cheap and very simple, get some plastic patio door mesh and apply a piece on the back of your mesh and it will block a good amount of light coming in. Another alternative would be to paint that part or the radiator support black.

[4g63lover]

I will take care of the lower grille when it gets warmer...

Thanks for the compliments and help guys!