Log in
Register
Reply With Quotei doubt all the controls are broken, unless you decided to take them out and just not connect them.
so when u say the heater doesn't even blow, does that mean it blows cold air? or does it not blow at all, meaning no hot, no cold?
Friday my altenator took a crap on me and I got it replaced with a new one, now my HVAC controls wont work. When I turn on the heat its not even blowing. Its like there is no power going to it. I checked the fuses and they all seem fine. Anyone know what might be the problem?
_______________________________________
"Sey dem a Gangsta, an dem gal a run dem head, tell dem when fi touch de street, and when fi goto bed"
i doubt all the controls are broken, unless you decided to take them out and just not connect them.
so when u say the heater doesn't even blow, does that mean it blows cold air? or does it not blow at all, meaning no hot, no cold?
I am having a problem with my heat blowing only cold air. Any suggestions
search for people with problems with their heater shutoff valve.Originally Posted by 02galant
Ok sorry I did'nt update this sooner, but its fixed. Turns out the mechanic who did the altenator pulled the fuse and didnt put it back. It was just missing the fuse
_______________________________________
"Sey dem a Gangsta, an dem gal a run dem head, tell dem when fi touch de street, and when fi goto bed"
02galant, mine did that, my problem was the cable that helps you turn it to heat was kinking up and not going into the pipe. i had to wd40 it and now it works fine ever since, you should bend it the opposite way to make it straight if that is your problem
what the hell is your mechanic doin removing your fuse for? replacing an alternator thats not standard procedure dude>
heater core maybe
Posting Rules
Bookmarks