Log in
Register
Reply With Quoteyou dont have the tab on the top where it screws to the headlight housing? thats really the only way you could hold it down is that screw. but if you dont have that, shit i wouldnt even know. is it just that corner? or both?
What is the best way to properly secure my JDM corner light?The clips on the back do seem to mount anywhere. Everyone with JDM two piece lights, how did you secure them?
you dont have the tab on the top where it screws to the headlight housing? thats really the only way you could hold it down is that screw. but if you dont have that, shit i wouldnt even know. is it just that corner? or both?
TeamDreamSpeed / PizzaBoy
Originally Posted by G-spot
Duct tape it...
I don't have anything else to secure it but the two "clip"-things (no idea what those things would be called in english) locked in the chassis - no screws or anything.
Was kinda surprised when I took mine out the first time, it actually fell out. And my JDM are from factory.
I know it seems very uncertain not to mount it with screws etc. but mine are good for 240+ km/h
Yea, mine don't have that screw either.
The clips are what hold it in place.
1994 Galant VR-4 GOKUH ( 230kw atw )
2000 Legnum VR-4 ( Daily, 155.5kw atw )
1997 Legnum VR-4 - Yes Another one
1995 FTO - V6 Mivec 200hp
I have those clips on the rear of my lights. They just don't clip in securely. I want my to not come out later.
Have you tried to see how DOHCstnr secured his? I am curious too.
1991 Galant VR4 1948/2000_________1996 Galant "S" 5 speed 2.4L turbo
Waiting for him to chime in.
Posting Rules
Bookmarks