gonna need a bigger pic of the diagram
I have this wiring diagram for the factory amp that came out of a 99 Eclipse. I plan on putting this amp in my 7g. I can't read these diagrams at all. Would someone please decipher the diagram for me and tell me the color codes of the connector wires and identify them?
Last edited by PogiGreg; 03-23-2008 at 07:41 PM
gonna need a bigger pic of the diagram
that's one big cluster F*** of a diagram. if the amp is a 4 channel amp, there should be a power, ground, remote, and 8 speakers wires in and 8 out. according to the EIA wire code:
white - front left positive
white/black - front left negative
violet - rear right positive
violet/black - rear right negative
grey - front right positive
grey/black - front right negative
green - rear left positive
green/black - rear left negative
I am not for sure if the stock system will have these colors for speakers wire coming out of the deck. but that is something to look for. if this is the case, just cut the wires and put the speaker side on the output side and the deck side of the wire on the input side.
i can say from that diagram although, 1 and 9 are ground then 2 and 10 are power
Bookmarks