The Galant Center - Powered by vBulletin

Thread: Galante's 8g Build

Page 7 of 28 FirstFirst ... 3456789101117 ... LastLast
Showing results 121 to 140 of 559
  1. #121
    Experienced TGC Member
    Join Date
    10-18-2007
    Location
    Glen Burnie, MD
    Posts
    1,314
    Is there any type of primer in particular that should be used, I have 4 cans of white sandable primer in my basement right now. and how much paint is that? I have to do a front and rear bumper, how much do you think I would need?
    03 ES 5spd--Rota torque gloss black 17x8 et. 35--Hankook Ventus V12 evo 235/45/17--D2 coilovers--DC Sports STB--Intake--Brembo calipers--Powerslot Rotors--Stoptech Pads--SS brakes lines--35% tint--5k heads & 5k fogs--Alpine headunit--Kicker 400w amp--Alphasonix sub

  2. #122
    You are here entirely tooo much!! RAZ_76's Avatar
    Join Date
    11-13-2007
    Location
    -OKC-
    Posts
    3,970
    Well guys, sorry to burst your bubble but if your going to do it, do it right. I, myself would not just paint the bumper because you will be able to tell the difference in color shades. What I do and most shops do is paint the front bumper and both fenders. If you just do teh bumper, it will stick out. Just heads up.

  3. #123
    Experienced TGC Member
    Join Date
    10-18-2007
    Location
    Glen Burnie, MD
    Posts
    1,314
    I figured the tone would be off by a little but still...
    03 ES 5spd--Rota torque gloss black 17x8 et. 35--Hankook Ventus V12 evo 235/45/17--D2 coilovers--DC Sports STB--Intake--Brembo calipers--Powerslot Rotors--Stoptech Pads--SS brakes lines--35% tint--5k heads & 5k fogs--Alpine headunit--Kicker 400w amp--Alphasonix sub

  4. #124
    Experienced TGC Member Galante's Avatar
    Join Date
    05-01-2008
    Location
    Manitoba
    Posts
    1,589
    Quote Originally Posted by Dominicano View Post
    pretty good work you make it look easy, how are you dealing with dust while it dries?
    It's hard to avoid dust since I'm only using my garage as a paint booth but by closing door I'm able to prevent dust at minimum.
    "Mitsubishi Galant(e) for Life"

    Tuned 2013 Evolution X GSR PB

    -> Follow me on IG @blackblurr_x | 5-Speed | Check out my Build Here

  5. #125
    Experienced TGC Member Galante's Avatar
    Join Date
    05-01-2008
    Location
    Manitoba
    Posts
    1,589
    Whew! I just finished the clearcoat today afternoon .. Here are some pics! Enjoy!

    FG EGR visor..


    Grille..

    Grille/Bumper..



    Skirts..

    The whole gang..



    I'll start polishing and install on Sunday or Monday.. Clearcoat needs atleast 2 days drying time..
    "Mitsubishi Galant(e) for Life"

    Tuned 2013 Evolution X GSR PB

    -> Follow me on IG @blackblurr_x | 5-Speed | Check out my Build Here

  6. #126
    You are here entirely tooo much!! 9G's Avatar
    Join Date
    05-31-2005
    Posts
    4,735
    good job man!

  7. #127
    You are here entirely tooo much!! RAZ_76's Avatar
    Join Date
    11-13-2007
    Location
    -OKC-
    Posts
    3,970
    Excellent dude! I have more toy tables from my kids if you need any more, looks like you are running out of tables... JK messing with you.

  8. #128
    Experienced TGC Member Galante's Avatar
    Join Date
    05-01-2008
    Location
    Manitoba
    Posts
    1,589
    Thanks Ray! Actually I am indeed need more tables.. ;)
    "Mitsubishi Galant(e) for Life"

    Tuned 2013 Evolution X GSR PB

    -> Follow me on IG @blackblurr_x | 5-Speed | Check out my Build Here

  9. #129
    Fly down to Oregon and paint my bumpers! Lol, good job dude
    OZ Rally Crew #001, Quaife Club member :D

  10. #130
    Experienced TGC Member
    Join Date
    10-18-2007
    Location
    Glen Burnie, MD
    Posts
    1,314
    Well I know what Im doing with my next paycheck
    03 ES 5spd--Rota torque gloss black 17x8 et. 35--Hankook Ventus V12 evo 235/45/17--D2 coilovers--DC Sports STB--Intake--Brembo calipers--Powerslot Rotors--Stoptech Pads--SS brakes lines--35% tint--5k heads & 5k fogs--Alpine headunit--Kicker 400w amp--Alphasonix sub

  11. #131
    Experienced TGC Member glantv699's Avatar
    Join Date
    04-14-2005
    Location
    PA
    Posts
    1,046
    stellar paint job, gonna look hot on the G

    > TGCPA - SOUTHEAST
    > 2010 Evolution X SE #183 of 340 (1 of 54 in Octane Blue)
    > 1999 ES V6 (Sold 2/2011)

  12. #132
    Experienced TGC Member Galante's Avatar
    Join Date
    05-01-2008
    Location
    Manitoba
    Posts
    1,589
    Quote Originally Posted by greddy View Post
    Fly down to Oregon and paint my bumpers! Lol, good job dude
    Sure, send me the plane tickets! lol
    "Mitsubishi Galant(e) for Life"

    Tuned 2013 Evolution X GSR PB

    -> Follow me on IG @blackblurr_x | 5-Speed | Check out my Build Here

  13. #133
    Experienced TGC Member Galante's Avatar
    Join Date
    05-01-2008
    Location
    Manitoba
    Posts
    1,589
    Quote Originally Posted by WhiteGalant View Post
    Is there any type of primer in particular that should be used, I have 4 cans of white sandable primer in my basement right now. and how much paint is that? I have to do a front and rear bumper, how much do you think I would need?
    You have to use flexible primer surfacer. 3 cans is enough. I used 3 can for everything.
    "Mitsubishi Galant(e) for Life"

    Tuned 2013 Evolution X GSR PB

    -> Follow me on IG @blackblurr_x | 5-Speed | Check out my Build Here

  14. #134
    Experienced TGC Member Galante's Avatar
    Join Date
    05-01-2008
    Location
    Manitoba
    Posts
    1,589
    I installed the bumper and skirts today without polishing it yet.. Finally here's how she looks!!!!!



    "Mitsubishi Galant(e) for Life"

    Tuned 2013 Evolution X GSR PB

    -> Follow me on IG @blackblurr_x | 5-Speed | Check out my Build Here

  15. #135
    looks really good. not good for painting it in the garage your first time, but as in good period. Thats really awesome!!!
    Jigz-TGCIL Sosick Motorsports

    R.I.P. Christopher "CRAZY CHRIS" Beckmann
    "you dont appreciate friendship until you lose your bestfriend...."
    I'd rather have the knowledge and ability to do it than the money to buy it already done.

  16. #136
    Very nicely done!
    OZ Rally Crew #001, Quaife Club member :D

  17. #137
    I'm impressed with the good job, and the color matching to the silver. Its a difficult color to nicely color match even for body shops.

  18. #138
    nice, now we are twins :D

  19. #139
    damn.... nice... wanna come and paint my car?
    Mods:
    2 tone leather interior, touch screen navigation, 7inch headrest tv's, 17" Driftz Black and Polished rims, 215 50 17 Goodyear Eagle Nct5 tires Tein s lowering springs, kyb gr-2 struts, rearview mirror camera, diamond black paint custom front and lower grill, Chrome door pillars., and chrome door handles. Powder coated my wipper arms wet black, exhaust heat sheild and my valve cover. 2nd gen led taillights

  20. #140
    TGC Regular EATsleepJDM's Avatar
    Join Date
    05-17-2008
    Location
    Edison Park (NW Chicago), IL
    Posts
    450
    awesome good.good luck on the other future plans you have for the car.



    WANNA LOOK FRESH????
    GET SOME CLOTHES AT KARMALOOP.COM AND GET 20% ON FIRST PURCHASE WHEN USING REPCODE:KN21899

    siniGANG represent!

Page 7 of 28 FirstFirst ... 3456789101117 ... LastLast

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •