Galant306m's turbo build

[Galant306m]

Its time to start this thing, as you remember this summer i picked up a 4g63 head and a 14b turbo. Now that school is coming to a end im get to dump some money into the G that has been waiting patently.

what i have to start with




have'nt decided if im going to run the 14b or if im going to go with something bigger.

the parts list
4g63 head kit
4g63 timing kit
new rods
new pistons
rings and bearings
intercooler piping kit
intercooler
2g equal length exhaust manifold and down pipe
2g turbo ecu (eprom if i can find one)
2g wire harness
BOV
maf translator
wide band o2 sensors
aem ems
boost gauge
boost controller
oil pressure gauge
oil lines
2g distributor
cams? haven't (decided if im going to cam it)
adjustable cam gears
injectors
fuel rail
fuel pump
and a 5 spd swap with lsd.
im still forgetting stuff but thats the basic parts list that im going to have by the end of January.
The goal is to have it done by June or July.
pics of the head getting pulled apart tomorrow when i get done. Once it is all pulled apart im going to take it to work and throw it in the hot bath with all the components. My friends dad owns a grinding shop that is going to blanchor grind the head for me for a case of beer, also know some one with a dyno thats going to charge 200 dollars for a session, which the session time is as long as i need to complete the tunes.

Stay tuned.

[Voodoo]

Yayz! You finally won't be balls-slow anymore! :smt030

[Galant306m]

Got the head all pulled apart now time to have her hot bathed and get some head work done.

[RedGalant2k1]

You should extrude hone that intake mani, or get a nicer unit.

[Galant306m]

You should extrude hone that intake mani, or get a nicer unit.

i was thinking about getting a nicer one, or cleaning that one up really good and having it powder coated. The intake side of that head is really carbon'd up im not sure yet what im going to do to clean that out.

[Galant306m]

OBX or Skunk2 cam gears???

[Galant306m]

Bought some stuff today that was on my list,pics when they arrive.

valve kit
innercooler
innercooler piping kit (comes with a bov that im not going to use)
skunk2 cam gears
obx equal length exhaust housing
arp head stud kit

[seth98esT]

What valve kit did you go with?

[Galant306m]

http://cgi.ebay.com/ebaymotors/ws/eB...3AIT&viewitem=

[Galant306m]

Stainless Steal Valves with lash adjusters and guides.

[Galant306m]

UPS Brought me something today.

[greddy]

Nice n shiny!

[Galant306m]

Nice n shiny!

Only for a little while till it get hot then its going to be nice a purple lol, going to take it to work tonight and redo all the welds since they are only fuse welded. Dont want it to crack.

[02galant]

^^ Good call.

[Galant306m]

More parts came today :)



(I need to buy a digital camera cell phone pics suck.)

[Galanttuner10]

i would like to know wut size intercooler u got cuz i know 2 mine im going 2 have 2 get a 2inch think 1 so it fits behings a stock 96 bumper.. im prolly gonna get a 27x7x2

[Galant306m]

the one that i got is 27x9x3

[RedGalant2k1]

Nice, should be nice to see once it is all done.

[00galantguy]

lookin good so far cant wait to see the finished product

[Galant306m]

i have a bid on ebay for these, and if you are said person that is bidding against me knock it off i need new seats damnit.

http://cgi.ebay.com/ebaymotors/ws/eB...3AIT&viewitem=