suspension setup

[dlvetoblue]

hey guys, currently, i have progress springs with front KYB AGX's and back tokico illumina's. I got the set up done at Road Race Enginneering and it turned out to be a great set up. One problem is that I don't like the amount of drop with the progress springs. Before, i use to have Ground controls (which use Eibach springs) and i had the front a little lower than the back. About an inch and a half wheel gap in the front and about 2 inch gap in the back. The front doesn't drop as much as I would like with the progress springs. I only chose to go with progress springs because Road RAce didn't want to take the risk in modifying the ground controls to fit my shocks & struts. I just need some knowledge from peeps who've modified their ground controls to fit the shocks and struts. I was also wondering if it affected being able to control the ride height at all after the modification. Thanks...

[pinoyesv6]

easy way. try to contact ground control and see if they can sell u a sleeve for the kyb's...

but yea i think the people modified the strut and not the coils...