yea they will work but u have to move the dowel pins!!
i know that the evo8 cams are lighter but can they be use in a 2g head?
yea they will work but u have to move the dowel pins!!
O really what way thou i might try them and see what type of number i can get out of them and are these for aftermarket as well.
www.team-2g.com.
We were having this discussion not long ago.
It is possible but will require work like said.
As far as lift and duration go in the evo 8 cams,
And well...it's hollow so less rotational mass of course. In short it is beneficial on one end IF you have your setup built to match that lift better than a stock 2g....Code:4G63 ( Eclipse/Talon Turbo Camshafts) Adv. / Dur. Dur. @ .050 Lift (in) Lift (mm) 248°/248° 200°/200° .349"/.350" 8.86/8.89 4g63 ( Evolution VIII ) Adv. Dur. Dur @ .050 Lift (in) Lift (mm) 248°/248° 200°/200° .386"/.367" 9.80/9.32
(lulz T25) Or at the same time it could be a headache and spending $300 on a set of DSM performance cams could yield a MUCH better result for your setup. Up to you.
RIP
1995 7G 4G64 / 63T DOHC Turbo
Part Out Coming Soon
In search of 2G 3000GT VR4
Daily driving
Dat '08 Cobalt Coupe
i would try it but i just dont want to break noting. plus i know that we wouldn't have the mivec
That's cool and all, but which part of my statement is false? Not starting a pissing match but cams alone isn't making that car.
RIP
1995 7G 4G64 / 63T DOHC Turbo
Part Out Coming Soon
In search of 2G 3000GT VR4
Daily driving
Dat '08 Cobalt Coupe
Sorry, i was talking about the last sentence Bmore wrote. Simple,if you find some Evo performance cams very cheap buy them asap. There are all kinds or tutorials on the net that will show u how to get these cams working..
ok that cheap and fast part sound good to me LOL. and i bet with a 14b evo cams would pull 2x better on take off and boost better.
Last edited by XXL4G64; 01-26-2009 at 02:13 PM
Bookmarks