Will they rub... in a bad way?

[.AGENT.]

I'm thinking of getting these rims this week... http://www.wheelmax.com/Wheels/ADR/kasaich.gif

I'm not 100% on the offset but would an 18x8 rim (without camber correction) rub? I'm lowered rougly 1.5 inches...

Any help would be great, feel free to let me know what you think of the rims I intend to get as well as it's a toss up right now between these ADR Kasai's and RH Evolution D6000's shown here... http://www.upgrademotoring.com/wheels/rhevo_d6000.htm

Thanks guys and gals.

[Khopari]

<div class='quotetop'>QUOTE(.AGENT.)</div><div class='quotemain'>I'm thinking of getting these rims this week... Â*http://www.wheelmax.com/Wheels/ADR/kasaich.gif

I'm not 100% on the offset but would an 18x8 rim (without camber correction) rub? Â*I'm lowered rougly 1.5 inches... Â*

Any help would be great, feel free to let me know what you think of the rims I intend to get as well as it's a toss up right now between these ADR Kasai's and RH Evolution D6000's shown here... http://www.upgrademotoring.com/wheels/rhevo_d6000.htm

Thanks guys and gals. Â*</div>

i would not recommend you getting rims from wheelmax they are not good at customer service,,, trust me man,,, you rather go to wheelbouqe
they give TGC 10% and free shipping.......

[.AGENT.]

I'm definitely going with Wheel Botique but the best picture of the rims I could find happend to come from WheelMax, thanks for the input though!Anyone have advice on the technical side of this post?

[Supernova]

Wheelmax did me good on my wheels. No hassle, got to me fast.

[.AGENT.]

Okay... LoL... please, I already know where I'm going to order from... I didn't start this topic to discuss that... I'd like to know if an 18x8 (I know the 18 will work but what about the 8?) wheel will fit an 8G that has been lowered roughly 1.5 inches without rubbing. At any rate thanks for your recomendations on where to purchase them should they fit.

[2k2mitsu]

they should fit fine as long as the offset is close to the +46 offset.....i have 18s with a 2" progress drop...no problem

[Prophet]

Try to go with the 18x7.5 but if you do have to go with the 18x8 you should be fine. If not then roll the fenders.

Jason

[antmoneygtz]

i dont think you would even have to roll the finders with the drop u got... u shoudl be fine... maybe alil rubbin on hard turns... but if u want virtually no rubbing at all... u gotta roll the fenders...